07-22-2014 11:47 PM
Hi
In our environment the catalog backup is failing with below mentioned error. the backup is configured to Tape library, Tape library is configured as NDMP.
My question is can i backup my catalog to NDMP Based Tape library.
Can some body suggest how do i resolve this issue.
Regards
Kamal
Solved! Go to Solution.
07-23-2014 12:00 AM
Hello
The tape library is still controlled by a media server (probably your master server). Have you assigned (zoned) some of those drives to the master server? If not, you need to. The master cannot send its data to the library via the NDMP host.
You probably have a different storage unit that is already configured that you need to use.
Post the output of
scan (Install Path\veritas\volmgr\bin)
tpconfig -l (Install Path\veritas\volmgr\bin)
bpstulist -U (Install Path\veritas\netbackup\bin\admincmd)
bppllist 'catalog backup policy name' -U (Install Path\veritas\netbackup\bin\admincmd)
07-23-2014 12:00 AM
Hello
The tape library is still controlled by a media server (probably your master server). Have you assigned (zoned) some of those drives to the master server? If not, you need to. The master cannot send its data to the library via the NDMP host.
You probably have a different storage unit that is already configured that you need to use.
Post the output of
scan (Install Path\veritas\volmgr\bin)
tpconfig -l (Install Path\veritas\volmgr\bin)
bpstulist -U (Install Path\veritas\netbackup\bin\admincmd)
bppllist 'catalog backup policy name' -U (Install Path\veritas\netbackup\bin\admincmd)
07-23-2014 12:14 AM
NDMP devices can ONLY backup NDMP hosts.
As per Riaan's post, you need to connect drive(s) to the master server in order to backup catalogs or any other Standard or MS-Windows backups.
07-23-2014 12:36 AM
Hi Riaan and Marianne
Thanks for the reply. Customer is using Spectra make Tape library, which has 4 Tape drives. All 4 Tape drives are configured as NDMP Storage unit. This 4 Tape drives are also zoned with Master/Media Server.
When i try to create a different storage unit, 4 Tape drives and Robotic is displayed, In the device selection i see 4 drives are not selected (unused element address).
i am unable to create a different storage unit,
Is it possible to configure a tape library which are already configured as NDMP storage unit, as a NON NDMP Storage unit.
Sorry for my poor english
Thanks
Kamal
07-23-2014 12:45 AM
Hi,
Please post the scan command as requested. The unused element address is usually when NetBackup can't figure out how the drives relate to the locations in the robot. And that happens when the drives are not visible on a master (media) server.
07-29-2014 03:31 AM
... i am unable to create a different storage unit,
You need to first of all create tape devices for the master server before you can add a Storage Unit.
You have 2 choices:
Assign/zone dedicated drives for master and NAS server
(e.g. 1 tape drive to master and rest of drives to NAS server)
Zone all drives to both master and NAS server and configure drives as Shared. (SSO option is needed).
See this section in NBU for NDMP manual:
Using the Shared Storage Option (SSO)