09-29-2021 01:37 AM
Hi Dear Community,
l need to copy image frozen tape to any tape.from Client soft l did the procedure -> Catalog -> action->duplicate -> media id -> frozen tape an etc. But l click search mow didn't appeared any images on search list.
but l check in reports section -> images on tape -> l search the images on frozen tape the images were listed.
who can help me what do l need to do?
is possible do this with command.
09-29-2021 05:26 AM
09-30-2021 01:49 AM
Are you sure this is primary copy? Maybe it is copy 2 or copy 3?
please check with this command bpimmedia -mediaid 000042
if there is FRAG 1 or FRAG 2 at the beginning
09-30-2021 05:29 AM
@quebek thanks for the response!
yes l commanded the bpimmedia -mediaid 000026 (the tape is frozen)
the list was appeared with FRAG 1 and FRAG 2
09-30-2021 05:31 AM - edited 09-30-2021 05:34 AM
Dear @quebek ,
which commands do l need to write with bpdublicate for copy images from frozen tape (000026) to a new tape (000028)?
09-30-2021 05:37 AM
please use GUI if you are unsure. select copy 2 in gui
here is this manual for bpduplicate https://www.veritas.com/support/en_US/doc/123533878-127136857-0/v123537351-127136857
09-30-2021 05:41 AM
yes,when l select copy 2 the files were listed. What do l need next step? Please can you help?
09-30-2021 05:46 AM
09-30-2021 11:53 PM
Dear @quebek ,
Wwhen l check the results in the log file "Skipping copy 1 of backup id ak-mf-ipa-01.mf.int.mcc_1631841347, is not required copy 2 ". was writen.
10-01-2021 12:19 AM
10-01-2021 01:13 AM
10-01-2021 01:15 AM
10-01-2021 01:19 AM
2 copies are enough.
But when l cmannd bpimmedia -mediaid 000028 ( destination tape). The output shows that "no entity was found"
10-06-2021 11:07 AM
It appears that copy 1 is on media @aaaae and another frag is on 000026. I don't see where the copy was done to 000028.
10-06-2021 03:29 PM
As @DPeaco indicates you also have a copy of the backup in MSDP. You can use this to create a new copy if you need. The disk based copy was when you posted the picture the primary copy so this will be used as the source for the duplication by default. A command that will perform the duplication is
# bpduplicate -backupid ak-mf-ipa-01.mf.int.mcc_1631841347 -dstunit <tape STU name>
You may also need or may want to add information regarding the volume pool to use (-dp <volume pool>) and if you want to collect logging information (-L <progress log>). Note the progress log will probably need to be located in a whitelisted location (typically use the user_ops folder under the NetBackup logs location).
Are there any other images on the frozen tape?