03-28-2013 11:39 AM
For some reason, Netbackup lists dozens, maybe hundreds, of tapes as being in library slot 0, or being in the library but not in a slot. The tapes are definitely NOT in the library. They are all stored offsite, and verified to be at the offsite storage site.
We just noticed this, but it appears to have been going on for quite a while now.
The library is a Scalar i6000 if that makes a difference. Running Netbackup 7.0.1.
Solved! Go to Solution.
03-28-2013 03:02 PM
If you run robtest, and the comand
s s
Do the taoes show in the correct slots
1. If they do not, you have a library issue
2. If they look correct, then I would move all the tapes in NBU to 'standalone' and them re-run the inventory.
Martin
03-28-2013 11:54 AM
Turns out that ALL my tapes are showing up as being in the robot. My entire inventory.
Anything that has been removed and sent offsite still shows up in Netbackup as being in the robot.
03-28-2013 01:32 PM
What is robot type? TLD? ACS? Something else?
Was robot inventoried after tapes have been removed?
Or Eject option in the GUI used to eject and update location?
Sound like someone may have manually 'moved' tapes in NBU?
03-28-2013 01:43 PM
Unfortunately this sounds like you should work the issue through symantec support. Sounds like maybe the volume groups changed.
03-28-2013 02:45 PM
It shows as a TLD library.
The operators exchange tapes in the library every day, and they have a procedure to do it through Netbackup using the MAP. That does an automatic inventory.
03-28-2013 03:02 PM
If you run robtest, and the comand
s s
Do the taoes show in the correct slots
1. If they do not, you have a library issue
2. If they look correct, then I would move all the tapes in NBU to 'standalone' and them re-run the inventory.
Martin
03-28-2013 03:20 PM
Yes, the tapes are fine in the library.
Apparently it has been this way for months. Maybe since the beginning when we installed this library in 2010.
The operator stumbled on to the problem completely by mistake. Everything has been working fine as-is and there is no reason to believe it will change any time soon.
03-28-2013 03:32 PM
So just so I am clear, you are seeing tapes in NBU that show in the library slots, that when you check in the library (via robtest) they are not there ...
IIf so, I would do as I suggested, move the tapes to standalone (select, right click, select move, set so they are not in a library).
Then, run inventory.
Does this make things look any better ...
M
03-28-2013 11:53 PM
Maybe show us a screenshot of what you are seeing?
04-08-2013 07:02 AM
Sorry, I had no idea there was still interest... I was not receiving any alerts that anyone had replied.
I just checked, and the problem seems to have cleared itself up since the operators last complained about it.
The problem was like this:
04-08-2013 07:09 AM
Did the problem really go away 'by itself' or was any of the advice followed?
Martin's post looked like a good solution....
04-08-2013 07:17 AM
I did nothing to try to solve the problem.
Things were working on Friday the 29th and appeared to have been that way for some time so I left it until Monday. Other things took precedence and then I took a couple days off.
When I logged in this morning, the problem was gone.
Tapes get swapped out of the library every day out there, so it probably cleared up in one of the many inventories.