06-22-2016 05:52 AM
I am migrating from an LTO4 library to an LTO6 one.
I currently have the both of them configured in the netbackup server, though I am only using the LTO4 until I finish configuring the LTO6 and then I will decom it.
Just loaded some tapes into the LTO6 library, and when I do an inventory, tapes come out as HCART.
The drives are configured as HCART3, and I am not sure why they are popping up as HCART. did a quick search and could not find where to modify that.
LTO4 drives and tapes are HCART.
I wanted to set the new ones as HCART3, so if I need a restore from an old tape, I can change one drive to HCART and use it for the restore.
Is there something I am missing?
Thanks!
Solved! Go to Solution.
06-27-2016 06:06 AM
I usually get the HP barcode lables.
for the frist batch I have them printed. Talked to support and they explained that you have to set barcode rules in order to have different density tapes.
I created a rule for the new tapes, and will have them printed insted of buying the hp ones for the new tapes.
06-22-2016 06:04 AM
Check the barcode rule setting,
Technotes for reference:
https://www.veritas.com/support/en_US/article.000044816
https://www.veritas.com/support/en_US/article.000081160
06-22-2016 06:25 AM
Nicolai, let´s see if I got it right.
I have to go to Barcode Rules, then create a new one, that will use:
Barcode Tag: Default
Media Type: 1/2 cartridge tape 3
volume Pool: Scratch
Now my only question is that if I still use lto4 tapes that are set as HCART, would that not be a conflict?
I forgot to mention that I have a remote location set as media server with another library that is still using LTO4 tapes, so I am not sure if it will end up being a mess.
Thanks :D
06-22-2016 06:38 AM
Hello,
I am surprised that media in library with drives configured as HCART3 are inventoried as HCART tapes. That should not happen.
Doublecheck/repeat Configure Devices wizard for this new library. After this, drive type and storage unit density should be consitent, for example both = HCART2. Then, after Robot Inventory, tapes type should be consistent with them too, thus = HCART2.
Regards
Michal
06-22-2016 11:38 AM
Michal, I tried deleting the robot and drives, added them again, still hcart.
First timeI am trying to do this mixed environment thing.
Drive type is set to HCART3, storage unit is also configured for HCART3.
double checked just in case, and yes, it is set to TLD(4) (which is the robot number, as I have vtl in data domain as well) hcart3.
roboty type: tld - tape library dlt
density: hcart3 - 1/2 inch catridge 3
robot number 4
any other idea what might be causing this?
06-22-2016 01:31 PM
should I set up a barcode rule that goes for media type hcart3?
what I am concerned about is that if I make this rule for hcart3 media type, when I add hcart media, will it take over?
not sure if they can coexist in the same environment.
06-25-2016 01:53 PM
06-27-2016 06:06 AM
I usually get the HP barcode lables.
for the frist batch I have them printed. Talked to support and they explained that you have to set barcode rules in order to have different density tapes.
I created a rule for the new tapes, and will have them printed insted of buying the hp ones for the new tapes.
06-27-2016 06:45 AM
Mmmm... so, it seems you decided to follow my advice?
06-27-2016 07:30 AM
I always do.
I have a little picture of you next to my server, whenever I am in trouble I pray to it :p