12-28-2015 02:56 AM
Hi
Please provides Commonds like :
Check Media Pool,
Formate Tape,
Available Pool
ETC
Solved! Go to Solution.
12-28-2015 02:04 PM
For info, you don't need to format tapes. It is possible to 're-label them, but to be honest there is no need, as NBU does this automatically when required.
A couple of other tape related commands that can be useful are :
vmquery -a (or -m <media id> for a specific tape)
bpmedialist (or with the -m <media id>option) - Not that this command only returns info on tapes that are assigned, so 'not in EMM db' message is not an issue, unless there should be images on the tape).
12-28-2015 01:33 PM
12-28-2015 02:04 PM
For info, you don't need to format tapes. It is possible to 're-label them, but to be honest there is no need, as NBU does this automatically when required.
A couple of other tape related commands that can be useful are :
vmquery -a (or -m <media id> for a specific tape)
bpmedialist (or with the -m <media id>option) - Not that this command only returns info on tapes that are assigned, so 'not in EMM db' message is not an issue, unless there should be images on the tape).