08-04-2015 02:33 AM
NBU 7.6.0.3, master and media on same server
where can one find the ip address of the SL500 tape library that the NBU is using to communicate with the robot? the SL500 and NBU was installed by vendor and the ip address details wasn't documented. unfortunately, the vendor company is no longer available.
appreciate any help.
Solved! Go to Solution.
08-04-2015 02:42 AM
NetBackup does not store the IP address.
Device-related records for a tape library depends on the type of connection.
If SCSI/Fibre, the hardware device address (/dev/sg... ) is stored in NBU.
If robot is controlled by ACSLS, the hostname of the ACSLS server is stored in NBU.
Hostname -> IP address lookup is controlled at OS-level - either /etc/hosts or DNS.
To know how the robot is connected, check output of:
/usr/openv/volmgr/bin/tpconfig -l
08-04-2015 05:26 AM
You can find the IP address of the robot on the operator panel.
https://docs.oracle.com/cd/E19724-01/96116KA/96116KA.pdf
08-04-2015 02:42 AM
NetBackup does not store the IP address.
Device-related records for a tape library depends on the type of connection.
If SCSI/Fibre, the hardware device address (/dev/sg... ) is stored in NBU.
If robot is controlled by ACSLS, the hostname of the ACSLS server is stored in NBU.
Hostname -> IP address lookup is controlled at OS-level - either /etc/hosts or DNS.
To know how the robot is connected, check output of:
/usr/openv/volmgr/bin/tpconfig -l
08-04-2015 02:48 AM
NetBackup does not communicate with robots / libraries over IP. Unless its an ACS configuration. Does your robot show TLD or ACS?
08-04-2015 05:26 AM
You can find the IP address of the robot on the operator panel.
https://docs.oracle.com/cd/E19724-01/96116KA/96116KA.pdf
08-19-2015 10:46 PM
hello,
pardon the lateness of my reply. i never found out, via the master server, the ip address of the tape library. i did try "/usr/openv/volmgr/bin/tpconfig -l" but it pointed me to some device names in "/dev". there are no entries in "/etc/hosts" file either.
so i ended up crafting an RJ-45 to USB cable in order to get into the console port of the SL500 and only then i found the ip address.
my understanding was the tape library uses this ip address to communicate with the master server but it seems this is only used as a management ip.
thanks for all the replies!
08-19-2015 10:55 PM