03-09-2015 06:19 AM
New Solaris 10 sparc install (on an E25K domain), booted on ZFS. Ran fine with no VxVM. Installed Storage Foundation 6.0.1 and patched up to 6.0.3. Now the server won't boot. Panics with these messages on console:
Mar 6 15:28:47 2015 WARNING: VxVM vxdmp V-5-0-216 mod_install returned 6 Mar 6 15:28:47 2015 WARNING: forceload of drv/vxdmp failed Mar 6 15:28:47 2015 WARNING: forceload of drv/vxio failed Mar 6 15:28:47 2015 WARNING: VxVM vxspec V-5-0-0 vxspec: vxio not loaded. Aborting vxspec load Mar 6 15:28:47 2015 WARNING: forceload of drv/vxspec failed panic[cpu512]/thread=2a1004dfc80: BAD TRAP: type=9 rp=2a1004df9f0 addr=7bf1b0f0 mmu_fsr=0 Mar 6 15:28:47 2015 : trap type = 0x9 Mar 6 15:28:47 2015 addr=0x7bf1b0f0 Mar 6 15:28:47 2015 pid=0, pc=0x7bf1b0f0, sp=0x2a100427291, tstate=0x4480001606, context=0x0 Mar 6 15:28:47 2015 g1-g7: 8, 180c000, 0, 0, 0, 10, 2a100427c80 Mar 6 15:28:47 2015
Any ideas where I went wrong and how to recover? Thanks.
Solved! Go to Solution.
03-09-2015 02:01 PM
Have a look at http://www.symantec.com/docs/TECH72420. Although this is for a different version , the error messages are the same.
Mike
03-09-2015 02:01 PM
Have a look at http://www.symantec.com/docs/TECH72420. Although this is for a different version , the error messages are the same.
Mike
03-12-2015 12:10 AM
If you have got system kernel core, you can open a case to support and ask for check panic reason.
03-12-2015 11:46 AM
Yep, this was the problem. I had to boot into recovery mode, run the solaris add_drv command, and after that we booted with no problems.
Thanks.