Hi,
I have two Dell Servers PowerEdge 6850 (http://www.sun.com/bigadmin/hcl/data/systems/details/1172.html) but with different Sas controller. It has PERC 5/i sas controller which is not supported out-of-the box on Solaris 10 (x64). Solaris 10 is updated with all pacthes from Sun.
So we had to use Disk Update CD (http://www.lsi.com/storage_home/products_home/internal_raid/
megaraid_sas/megaraid_sas_8888elp/index.html?remote=1&locale=EN) to be able to see disks. This machine also has two QLogic QLE2462 HBA 4Gb cards which are connected to EMC Clarion CX3-40 which is on V6.24 through McData FC switch 4700. Both servers see the same luns on EMC and we wanted to use Veritas Cluster File System on those machines. Idea is to use Veritas DMP for access to luns. We also wanted to use Veritas Cluster File System between two servers on those EMC luns. For now I have Demo codes for Veritas CFS.
Here is my problem: After the installation of Storage Foundation Cluster Files System V5.0 without any Veritas patches, my servers don't want to boot. Last lines I see on the screen are:
LLT INFO V-14-1-10009 LLT Protocol Available
GAB INFO V-15-1-20021 GAB Available
And machine is waiting here.
If I use power button, the machine says that it will try to reboot, but it can't (so only hard reset works).
I have used ./installer -installonly for installation and ./installer -configure to configure VXFS but I didn't configure VCFS before reboot.
I have now returned machine to the state before Veritas installation using flar's. Is this configuration supported?
Do I need to change any configuration files before reboot and after ./installer -configure? Do we need to change something on EMC or /kernel/drv/* files?
Do I need to install rolling pathces for anything before I reboot? I see that MP1/MP2 are not for Solaris 10 (intel x64).
Did this happend because of: http://seer.entsupport.symantec.com/docs/292445.htm
Thanks