I noticed the following messages during a recent reboot and these messages are currently viewable in /var/adm/messages.
WARNING: msgcnt 1 vxfs: mesg 017: vx_inactive_tran - /apps file system inode 943531 marked bad incore
the above message was repeated multiple, multiple times followed by messages like this:
vxfs: vxfs msgcnt 1 offset 0x00000010 0 0 0 0
Feb 10 09:20:22 servername vxfs: vxfs msgcnt 3 offset 0x00000000 0 0 0 0
Feb 10 09:20:22 servername vxfs: vxfs msgcnt 4 offset 0x00000000 0 0 0 0
=================================================
The system is a V480 running Solaris 9 and is at patch level 118558-05. It is also using Veritas Volume Manager 3.5. The fstyp command returns the filesystem is using vxfs version 5. After the server came back online after the reboot, all filesystems were mounted. I shutdown the apps on the server, unmounted /apps and ran a fsck which came back clean, however, I also spotted this on reboot and in the /var/adm/messages:
WARNING: Please umount(1M) / and run fsck(1M)
I have a cd in the system that I can boot off of to get into single user mode to fsck the root filesystem, but I wanted to know if there is anything else I should look at in regards to this problem before attempting to fsck the entire drive as I want to avoid any corruption if at all possible. I should also mention that in addition to the Daylight Saving Time patch I plan on installing, we have a script that identifies VxVM patches. The script is from Sun Microsystems and it identified the following patches that it downloaded and I will need to install:
112392-08
113203-04
113207-12
113211-05
113595-06
====================================
Here is some additional information:
vxdisk list
=================
DEVICE TYPE DISK GROUP STATUS
c1t0d0s2 sliced rootdisk rootdg online
c1t1d0s2 sliced rootmirror rootdg online
vxprint -htr
=================
Disk group: rootdg
dg rootdg default default 0 1159506683.1025.dh48074
dm rootdisk c1t0d0s2 sliced 10175 143339136 -
dm rootmirror c1t1d0s2 sliced 10175 143339136 -
v appsvol - ENABLED ACTIVE 41943040 SELECT - fsgen
pl appsvol-01 appsvol ENABLED ACTIVE 41945472 CONCAT - RW
sd rootdisk-04 appsvol-01 rootdisk 41975999 41945472 0 c1t0d0 ENA
pl appsvol-02 appsvol ENABLED ACTIVE 41945472 CONCAT - RW
sd rootmirror-05 appsvol-02 rootmirror 94392576 41945472 0 c1t1d0 ENA
v envdbvol - ENABLED ACTIVE 52428800 SELECT - fsgen
pl envdbvol-01 envdbvol ENABLED ACTIVE 52436928 CONCAT - RW
sd rootmirror-04 envdbvol-01 rootmirror 41955648 52436928 0 c1t1d0 ENA
v rootvol - ENABLED ACTIVE 16780224 ROUND - root
pl rootvol-01 rootvol ENABLED ACTIVE 16780224 CONCAT - RW
sd rootdisk-02 rootvol-01 rootdisk 20351 16780224 0 c1t0d0 ENA
pl rootvol-02 rootvol ENABLED ACTIVE 16780224 CONCAT - RW
sd rootmirror-02 rootvol-02 rootmirror 8395200 16780224 0 c1t1d0 ENA
v swapvol - ENABLED ACTIVE 8395200 ROUND - swap
pl swapvol-01 swapvol ENABLED ACTIVE 8395200 CONCAT - RW
sd rootdisk-01 swapvol-01 rootdisk 16800575 8395200 0 c1t0d0 ENA
pl swapvol-02 swapvol ENABLED ACTIVE 8395200 CONCAT - RW
sd rootmirror-01 swapvol-02 rootmirror 0 8395200 0 c1t1d0 ENA
v var - ENABLED ACTIVE 16780224 ROUND - fsgen
pl var-01 var ENABLED ACTIVE 16780224 CONCAT - RW
sd rootdisk-03 var-01 rootdisk 25195775 16780224 0 c1t0d0 ENA
pl var-02 var ENABLED ACTIVE 16780224 CONCAT - RW
sd rootmirror-03 var-02 rootmirror 25175424 16780224 0 c1t1d0 ENA
If any further information is requested, please respond with the syntax please as I am pretty much a novice in VxVM.
Thanks for any help.
Sunny
