03-22-2011 08:48 AM
buenos dias,
si alguien puede ayudarme,
tengo varios servidores con BESR 8.5. cuando deseo recuperar la imagen de algun servidor, ejecuto todos los pasos y la imagen se cimpleta hastsa el 100%. Luego cuando reinicio recibo el mensaje de WINDOWS BOOT MANAGER.
realice varias pruebas subiendo la imagen y marcando todas las opciones que tiene que ver con particion.
pueden por favor explicarme como resuelvo el problema? y si tienen alguna guiaespecifica con los pasos para la recuperacion.
contacto : yhascary26@hotmail.com
gracias anticipadas,
03-22-2011 08:59 AM
In english ?
03-22-2011 10:14 AM
HELLO MARKUS,
MY PROBLEM IS THE FOLLOWING:
I TRIED TO RESTORE THE ISO OF ONE OF MY SERVER WITH THE BESR CD.
I INSERTED MY CD ON THE SERVER AND BOOTED THEM
LATER I MAPED THE NTEWORK AND LOOK FOR THE IMAGE AND IT WAS COMPLETELY 100%, BUT WHEN I HAVE TO RESTART THE SERVER IT DOES NOT BOOT AND I RECEIVED
WINDOWS FAILED TO STAR . ....
IAM NOT SURE ABOUT 4 OPTIONS I HAVE IN THE WIZARD ARE ABOUT PARTITION AND MATER BOOT RECORD.
COULD YOU HELP ME PLEASE.
03-22-2011 10:16 AM
For the boot partition you need to enable mark as active, restore the drive signature.
03-22-2011 10:41 AM
thanks,
I will test it again.
in some minutes iam going to give you the answers,
03-22-2011 01:50 PM
Hi Markus,
Iam here one more time.
my server just finished up and i restarted the server receiving this informaation:
strike f1 to continue and f2 to ......
when i strike f1 system try to up but i receive this message : BOOTMGR is missing press ctrl alt del to restart.
this is on windows server 2008 r2.
when i was choosing image i marked all this options
-set drive active (for booting os)
-restore oroginal disk signature
-restore master boot record
03-22-2011 03:49 PM
Ok, according to users guide for BESR 8.5 http://www.symantec.com/business/support/index?page=content&id=TECH61503 Windows Server 2008R2 is NOT Supported, so you should use BESR 2010.
Besides that have a look here: http://www.symantec.com/business/support/index?page=content&id=TECH129112
03-25-2011 01:44 PM
Hello Markus,
thanks for your documentation, really i was making test with a windows server 2008 r2 in besr 8.5 and it is not suppported.
later i took others os to recovery my computer and when i choose de .vs2i file it says:THERE ARE PROBLEMS WITH SOME OF THE ENTRIES IN THE SYSTEM INDEX FILE.
ENTRY 1 : ERROR EC950006 : THE DESTINATION IS NOT VALID.
03-27-2011 12:42 PM
04-07-2011 04:06 AM
Have you had a look at the link ?