06-28-2007 12:06 PM
(the job failed with the following error: A tape read/write error has occurred. This is usually caused by dirty read/write heads in the tape drive. Clean the tape drive, and then try the job again. If the problem persists, try a different tape. You may also need to check for problems with cables, termination, or other hardware issues.)
I have a new sony tape drive, new tapes , new scsi controller, backup exec 11d w/sp1, still the job fails,
I cleand the tape heads, no change,I am not doing a backup-to-disk, I am backing up right to tape,to solve the porblem i reboot the server and erase the tape again and then run the job again , that seems to work, but i want to make my backups stable and not have to montior them every night to make sure they dont fail.
07-02-2007 05:31 AM