How to deploy Veritas Backup Exec on AWS Marketplace.Veritas Backup Exec provides simple, rapid, and secure offsite backup to AWS for your in-house virtual and physical environments and protects cloud-based workloads in AWS. Veritas Backup Exec helps...
How to deploy Veritas Backup Exec on Azure Marketplace.Veritas Backup Exec provides simple, rapid, and secure offsite backup to Azure for your on-premises environments and protects cloud-based workloads in Azure. Veritas Backup Exec helps customers r...
At its most basic, the upgrade procedure for Backup Exec is simply running installation media for the most recent version on an existing Backup Exec server. Backup Exec 15, 16 and 20 can be upgraded to Backup Exec 21 with this method. Article 1000443...
Hi,I setup a backup job with BE 10.d (v.5629 with SP3) a couple of weeks ago but after some days without problems now the job returns this error during the backup. The backup unit is an external IBM TotalStorage 2230 with 3580 Ultrium 3 attached to a...
I am in the process of setting up Backup Exec 11D with CPS on 12 servers, that include AD, Exchange 2003 and OWA. I have a file server that was configured for disk-to-disk-to-tape which is where Backup Exec and CPS are loaded. I have all of the lic...
Hi there..... any help on the following greatly appreciated.(Have had to chop out a lot of the error log etc (repeating parts) and consistency checks for size - and added a few ? as well)I changed a clients Administrator password (SBS2003) and whil...
Hello, I recently installed a IBM HH LTO Gen 2 SCSI TD, the specfications are as follows: IBM HH LTO Gen 2 SCSI200/400 GB Half High LTO-2 Tape DriveProduct # 39m5658Firmware ver: 0330The tape drive works fine with Windows backup, with the exception o...
I have a Promise VTrack M500p SCSI disk device with 1 logical drive that is 6.5 T. My backup-to-disk jobs run fine everywhere else, but if I create a b-to-d folder on that scsi device and run a job to it the job initianizes and then ques up and n...
Here's the text of the error:The operation could not be completed because a Continuous Protection Server error has occurred.Specific Error: RXRESULT_RMSError (RMS 0xb0362d0a)SHR255I The version management subsystem is not running. I checked all of th...
I am receiving the following 2 errors in my backups and cannot seem to find the cause. Any suggestions? Job ended: Monday, July 02, 2007 at 11:40:30 PMCompleted status: FailedFinal error: 0xe000fed1 - A failure occurred querying the Writer status.Fi...
Hello, He is our current Situation. For about 3 months our backup was running fine with no errors what so ever. After installing an addition 2gb of ram in the server, our backup failed daily. Uninstalled Backupexec, chaecked all cabling, tested ram...
I am wondering if anyone else is seeing the same issue. I have a new Dell server and it has a 2.8 gig zeon with 4 gigs of Ram. But I find 2 services from my Backup exec version 11.D running and using 45% CPU resources each. They are Beserver.exe and ...
Can backupexec be set to automatically erase the tape before performing the backup? I keep getting the media is not recognized error message even though I made prior backups to it.
Hello, I can't seem to find any documentation about any antivirus exclusions that should be implemented on my 11.0d media server. I'm running Symantec AntiVirus 10.1.5.5000. Does anyone have any best practices or know of any such documentation? Thank...
I'm backing up to a Dell PV-124T autoloader with an IBM ULTRIUM-TD3 tape drive. With the default settings, the backup runs at 3 MB per minute. Based on some suggestions I found in the forums, I made some changes to the device properties: I turned up ...
Hi everyone,I use Dell DAT72 4mm tapes with Backup Exec 10d on WIN2K server. It is able to store around 50GB. If there are more data to be written, the job stops and waits for another media. We have a 2 week backup strategy and total 10 tapes. The da...
When backing up Exchange Mailboxes the job fails with the error message:"A communications failure occurred on the backup device. "Exchange server is Exchange 2003 sp2 on the server 2003 sp1.Media server is windows 2000 server sp4.We are using Backup ...
Hi there, When running a backup with multiple remote agents, the backup job abruptly ends as soon as it hits an offline (or otherwise non-functioning) agent. For example, if I have a backup job that is supposed to backup computer A, B, and C If B is ...
Running backup exec to backup servers over-night to a dedicated backup server with SAN.First run of the job is great, sort of performance i expect, after that the jobs start degrading and take a lot longer, sometimes upto 100% of the time.If i clear ...
Hi hi, Our Dell server comes with Dual NIC ports and both of them are teamed up to form a network bridge on Windows 2003. Backup Exec is running on another server and the remote agent had been installed the Dell server without problems. Upon booting,...
Hello, I just updated my 6235 with SP1. Do I have to upgrade all of my RAWS clients in order for my backup jobs to run? I have about 1/2 my servers pushed with the newest RAWS, but I cannot reboot the other half right now, and I am worried that my...
First a little background. I'm running backup exec 10d on a Dell PE 2850 running 4 - 3.6hz xeon processors with 2GB RAM. I have a Quantam Scalar24 tape library with an LTO3 drive attached via SCSI to the backup server. All 30 of our servers are on...
Greetings...I recently moved our Backup Exec database to a new location, on a new SQL instance on our SQL 2005 server.The move went perfectly, and pretty much everything is good in Backup Exec land.One minor issue I'm having is with the database main...
