10-19-2015 12:19 PM
Hi Guys,
I have a two node cluster with same configurion for both the nodes. But the email alerts are received only for one node.
Yesterday CPU usage exceeded on the other node but i didnt get any alerts. What can be the issue.
The configuration shown by hasys -display is same on both the nodes.
VCS Warning for System abc, CPU Usage exceeded the threshold on the system
Event Time: Sat Oct 17 22:10:29 2015Entity Name: abc Entity Type: System Entity Subtype: m: x86_64, sys: Linux, r: 2.6.18-308.el5 Entity State: CPU Usage exceeded the threshold on the system Traps Origin: Veritas_Cluster_Server System Name: abcEntities Container Name: dsa-cluster Entities Container Type: VCS
See the configuration below for problamatic node. Nothing is captured in engine logs either
abc AgentsStopped 0
abc AvailableCapacity 100
abc CPUThresholdLevel Critical 90 Warning 80 Note 70 Info 60
abc CPUUsage 0
abc CPUUsageMonitoring Enabled 0 ActionThreshold 0 ActionTimeLimit 0 Action NONE NotifyThreshold 0 NotifyTimeLimit 0
abc Capacity 100
abc ConfigBlockCount 285
abc ConfigCheckSum 55879
abc ConfigDiskState CURRENT
abc ConfigFile /etc/VRTSvcs/conf/config
abc ConfigInfoCnt 0
abc ConfigModDate Mon 19 Oct 2015 01:52:56 PM CDT
abc ConnectorState Down
abc CurrentLimits
abc DiskHbStatus
abc DynamicLoad 0
abc EngineRestarted 0
abc EngineVersion 5.1.10.0
abc FencingWeight 0
abc Frozen 0
abc GUIIPAddr
abc HostUtilization CPU 1 Swap 5
abc LLTNodeId 1
abc LicenseType PERMANENT_SITE
abc Limits
abc LinkHbStatus eth0 UP eth6 UP
abc LoadTimeCounter 0
abc LoadTimeThreshold 600
abc LoadWarningLevel 80
abc NoAutoDisable 0
abc NodeId 1
abc OnGrpCnt 3
abc ShutdownTimeout 600
abc SourceFile ./main.cf
abc SwapThresholdLevel Critical 90 Warning 80 Note 70 Info 60
abc SysInfo Linux:abc,#1 SMP Fri Jan 27 17:17:51
abc SysName abc
abc SysState RUNNING
abc SystemLocation
abc SystemOwner
abc TFrozen 0
abc TRSE 0
abc UpDownState Up
abc UserInt 0
abc UserStr
abc VCSFeatures DR
abc VCSMode VCS
10-23-2015 01:58 AM
Hi,
Were you receiveing alerts by email before from the problematic node and now it has stopped all of a sudden?
Have you checked any firewall rules blocking outgoing packets to SMTP port? Also try restarting the notifier agent on the problematic node and see if that solves the problem.
Kindly enable debug level for the notifier agent when you perform any operation to see if it reports any issues.
Regards,
Sudhir