01-29-2013 02:27 PM
I cannot find documentation that says if a single VCS 6.0 coordination point server can support multiple clusters. If it can, do I need one VIP on the CPS per cluster that will utilize it as a quorum?
Regards,
Mark McCurdy
HP
Solved! Go to Solution.
01-30-2013 06:20 AM
01-29-2013 03:05 PM
01-30-2013 01:22 AM
See the SFHA 6.0 install guide:
Recommended CP server configurationsFollowing are the recommended CP server configurations:■ Multiple application clusters use three CP servers as their coordination pointsSee Figure 9-4 on page 93.■ Multiple application clusters use a single CP server and multiple pairs ofcoordinator disks (two) as their coordination pointsSee Figure 9-5 on page 94.■ Multiple application clusters use a single CP server as their coordination pointThis single coordination point fencing configuration must use a highly availableCP server that is configured on an SFHA cluster as its coordination point.See Figure 9-6 on page 94.
01-30-2013 05:56 AM
Some documentation references to the Veritas Cluster Server Installation Guide and Veritas Cluster Server Administrator’s Guide on SORT.
For more information on Symantec recommended CP server configurations, the necessity to make a single CP server configuration highly available, about Quorum agent, see:
Jubin
01-30-2013 06:10 AM
01-30-2013 06:20 AM
02-04-2013 01:01 PM
Hi AHerr,
I thought that a set of 3 CPS could serve up to 128 VCS Clusters (page 333 of VCS admin 6.0):
"A single CP server can serve multiple VCS clusters. A common set of CP servers