cancel
Showing results for 
Search instead for 
Did you mean: 
NetBackup Appliance

Discussion Posts

Resolved! Appliance backup lower than 20MB/s

In customer we have: 1 switch Procurve 1Gb/s 1 Appliance 5230 like media server with RAID6 (14TB) MSDP. 2.6.0.3 Version  (name HOLLY) 1 Master Server with Netbackup 7.6 (name BEN) All licensed required... to acelerator, NDMP, deduplication, MSDP,...

Resolved! Client Installation failed SuSE2.6.16

HI  maby some can help we have two appliance server Netbackup 5220 and the master server is a windows2008 R2 version 7.6.0.4 We have tried to install a Netbackup Client 7.6.0.1 on a virtual machine with Suse2.6.16. Unfortunately we get following o...

Aramis31 by Not applicable
  • 580 Views
  • 2 replies
  • 0 kudos

NBU 5230/5030 Replication Encription solution

Hi All, I need a solution for both 5230 and 5030 appliances encripting  replicated data. We have two site  A and B so we what to enable encription the date to send from A to B.  I need solution to configure it Also it will be nice if you can let ...

turhan_sensoy by Level 5
Partner Accredited Certified
  • 312 Views
  • 6 replies
  • 1 kudos

5230 SAN VMware backups - seeing too many LUNS

We mapped SAN LUNs to each appliance using single target and single initiator zoning, but for some reason the appliance is detecting over 300+ path/device/disk (/dev/sg313). We only have about 77 LUNs provisioned on our SAN, so the high counts must b...

Obi_Wan by Level 3
Employee Accredited
  • 303 Views
  • 2 replies
  • 0 kudos

Netbackup Appliance Administration

This is a pretty baasci question, I just want to make sure I am doing this right. I am new to Netbackup appliances. I have a Netbackup 5230 appliance that is setup as the master server, and another one that will be at a different site, also server as...

Strange NTP behavior on appliances running 2.6.1

I have a number of appliances (5220, 5230, 5330) - all of which are exhibiting strange NTP config behavior.  On all appliances I get the following when running a Network-NTPServer-Show: <host>.Network> NTPServer Show - [Error] Failed to add the foll...

elanmbx by Level 6
  • 727 Views
  • 0 replies
  • 1 kudos

Resolved! Appliance and OpenSSL POODLE vulnerability...

Hi, does anyone know what we can do to mitigate this: Found this: http://www.symantec.com/connect/blogs/new-openssl-vulnerability-could-facilitate-dos-attacks …which links to this Poodle article: http://www.symantec.com/connect/blogs/poodle-vulne...

sdo by Moderator
Partner    VIP    Certified
  • 975 Views
  • 3 replies
  • 3 kudos

Resolved! Mitigating IPMI vulnerability...

N5230 v2.6.1.2. Q1: I have been infiormed that the IPMI on our appliances are vulberable to a supposedly easily exploitable 'cipher zero IPMI attack'.  Is it possible to disable the IPMI features and just run it as an https port so that we can still...

sdo by Moderator
Partner    VIP    Certified
  • 802 Views
  • 3 replies
  • 0 kudos

Resolved! New Netbackup Appliance 5230 - Have a couple questions

I have been a Netbackup user for several years, however I am new to the appliance itsself and have some basic questions if someone can help.   It is my understanging that the appliance has basically 2 usable partitions, AdvancedDisk and MSDP. A cou...

AIR trought 10Gb NBU Appliance ports

Hello Experts I hope you are fine I need to configure a 5230 appliance to use one of the 10Gb port for AIR, my backups are comming to the apppliance using eth2 and SAN ports but I want the replication in AIR to use the 10Gb port   Hoq can I do tha...

josemlvega by Level 3
Partner Accredited Certified
  • 239 Views
  • 1 replies
  • 1 kudos

Resolved! Oracle Policy backup

I have two 5220 appliances, one that has the db pack installed, the other does not.  We have configured a backup on the appliance that does NOT have the db pack, using RMAN, to write a backup directly to the appliance.  I have the backup policy type ...

Resolved! NetBackup Appliances vs Leap Second of June 2015

  Hi, I was wondering which appliance may be affected by the positive leap second of June 30th? This is the output I get from a 2.6.0.4.  As far I read this may be affected: nb-appliance:/home/maintenance # cat /etc/SuSE-release SUSE Linux Enter...

Disk pool size is different

Dear Experts, I am having nbu i gco cluster setup which consists of 4 appliance at 2 at main site and two at dr. All the servers which are on the main site their backup goes to main site appliance ie 5230 and then duplicated to dr site appliance usi...

t_jadliwala by Level 4
Partner Accredited
  • 184 Views
  • 2 replies
  • 0 kudos

Resolved! Not enough space on appliance /inst folder

ERROR While upgrading appliance 5230 to 2.6.0.4-2 The upgrade requires at least 7.5G free space  on /inst. Currently the available space on /inst is 6.9G   Observation: Using cli mode we saw different folders in /inst/patch/appliance 1.applied  ...

Usman_Saeed by Level 4
Partner Accredited
  • 995 Views
  • 3 replies
  • 0 kudos

Resolved! Upgrade to 2.6.0.4 from 2.6.0.3

Hi we are planning to upgrade our NBU appliance 5220 to version 2.6.0.4 from 2.6.0.3. It is being used as media server and some tape drives are also attached to it. I have download the patch of 2.6.0.4 on my applaince. It total capacity is 40 TB a...

NBU35 by Level 6
  • 822 Views
  • 8 replies
  • 0 kudos