Duplications to tapes from MSDP pools are failing post 7.6.0.1 upgrade

HI All,

 

We are facing a strange issue in one of the MSDP pool i.e. Duplications to tapes from MSDP pools are failing post 7.6.0.1 upgrade.

Below is the error log description,

Regards,

Rajesh

 

4/25/2014 11:11:00 AM - Info bptm(pid=5384) start           
4/25/2014 11:11:00 AM - started process bptm (5384)
4/25/2014 11:11:00 AM - Info bptm(pid=5384) using 65536 data buffer size       
4/25/2014 11:11:00 AM - Info bptm(pid=5384) setting receive network buffer to 263168 bytes     
4/25/2014 11:11:00 AM - Info bptm(pid=5384) using 30 data buffers        
4/25/2014 11:11:00 AM - requesting resource mpd5-hcart3-robot-tld-0
4/25/2014 11:11:00 AM - granted resource LBW732
4/25/2014 11:11:00 AM - granted resource HP.ULTRIUM3-SCSI.001
4/25/2014 11:11:00 AM - granted resource mpd5-hcart3-robot-tld-0
4/25/2014 11:11:01 AM - Info bptm(pid=5384) start backup          
4/25/2014 11:11:02 AM - Info bpdm(pid=6512) started           
4/25/2014 11:11:02 AM - started process bpdm (6512)
4/25/2014 11:11:03 AM - Info bpdm(pid=6512) reading backup image         
4/25/2014 11:11:03 AM - Info bptm(pid=5384) setting receive network buffer to 263168 bytes     
4/25/2014 11:11:03 AM - Info bptm(pid=5384) backup child process is pid 6408.6232      
4/25/2014 11:11:03 AM - Info bptm(pid=6408) start           
4/25/2014 11:11:03 AM - started process bptm (6408)
4/25/2014 11:11:03 AM - Info bpdm(pid=6512) using 30 data buffers        
4/25/2014 11:11:03 AM - Info bpdm(pid=6512) spawning a child process        
4/25/2014 11:11:03 AM - Info bpbrm(pid=6512) child pid: 8100         
4/25/2014 11:11:03 AM - Info bpdm(pid=6512) requesting nbjm for media        
4/25/2014 11:11:03 AM - Info bpdm(pid=8100) started           
4/25/2014 11:11:03 AM - started process bpdm (8100)
4/25/2014 11:11:04 AM - begin reading
4/25/2014 11:11:05 AM - Info bptm(pid=5384) media id LBW732 mounted on drive index 0, drivepath {0,0,0,0}, drivename HP.ULTRIUM3-SCSI.001, copy 2
4/25/2014 11:16:06 AM - end reading; read time: 0:05:02
4/25/2014 11:16:07 AM - begin reading
4/25/2014 11:27:03 AM - Critical bpdm(pid=6512) Storage Server Error: (Storage server: PureDisk:MPD6) PdvfsRead: Failed to read from spoold (Input/output error). Ensure storage server services are running and operational. V-454-19
4/25/2014 11:27:03 AM - Critical bpdm(pid=6512) sts_read_image failed: error 2060017 system call failed     
4/25/2014 11:27:03 AM - Critical bpdm(pid=6512) image read failed: error 2060017: system call failed    
4/25/2014 11:27:04 AM - Error bpdm(pid=6512) cannot read image from disk, Invalid argument     
4/25/2014 11:27:22 AM - Error bpduplicate(pid=13596) host MPD6 backup id INTFF_1397920802 read failed, media read error (85). 
4/25/2014 11:27:22 AM - Error bpduplicate(pid=13596) host MPD5 backupid INTFF_1397920802 write failed, termination requested by administrator (150). 
4/25/2014 11:27:22 AM - Error bpduplicate(pid=13596) Duplicate of backupid INTFF_1397920802 failed, termination requested by administrator (150).  
4/25/2014 11:27:22 AM - Error bpduplicate(pid=13596) Status = no images were successfully processed.     
4/25/2014 11:27:22 AM - end Duplicate; elapsed time: 0:42:48
no images were successfully processed(191)

 

4 Replies
Highlighted

Since you mentioned that you

Since you mentioned that you are facing this issue just after the upgradr to 7.6.0.1 can u verify if the MSDP database conversion was successful and msdp is up and running.. Hope you had not cancelled the conversion process after the upgrade. The msdp disk pool will remain down and unusable unless the conversion is completed. You can refer to the netbackup 7.6 upgrade guide for details of the msdp database conversion.
Highlighted

All conversion happened

All conversion happened properly and it was successful. But Symantec is telling that backup images are corrupted , if that is the case then backup shouldnt import but import has happened properly only issue with duplicating images to tapes.

 

Highlighted

Are you running these

Are you running these duplication jobs manually or through SLP ??

Highlighted

I am having the same problem

I am having the same problem trying to run duplicates from the catalog screen and the command line.  I can issue the command or choose to duplicate images from the catalog screen.  The command/screen is successfull entered, but nothing shows up in the activity monitor.  I have parallel environments and am experiencing this on both AIX 7.1 and RHEL 6.5 masters.  Any suggestions?