02-22-2011 05:29 AM
Hello People:
I try to start using NDMP for duplicated my images using a Vault Profile from Quantum DXI DIsk to Tape. I have 1 NDMP drive configured. We set on the Duplicated tap on the Vault Profile to use this NDMP drive. When I run the Vault Profile Session, This is what I get:
2/22/2011 9:17:00 AM - begin Duplicate
2/22/2011 9:17:01 AM - requesting resource server-hcart-DXI-NDMP-Drive
2/22/2011 9:17:01 AM - requesting resource @aaaau
2/22/2011 9:17:01 AM - reserving resource @aaaau
2/22/2011 9:17:01 AM - reserved resource @aaaau
2/22/2011 9:17:01 AM - granted resource A00019
2/22/2011 9:17:01 AM - granted resource IBM.ULTRIUM-TD4.000
2/22/2011 9:17:01 AM - granted resource server-hcart-DXI-NDMP-Drive
2/22/2011 9:17:01 AM - granted resource MediaID=@aaaau;DiskVolume=Open_Systems;DiskPool=DXIPool_Disk;Path=Open_Systems;StorageServer=Open-St...
2/22/2011 9:17:04 AM - started process bptm (8724)
2/22/2011 9:17:11 AM - started process bptm (6168)
2/22/2011 9:17:34 AM - Error bptm(pid=6168) ndmp_connect_to_server: ndmp_create_session failed
2/22/2011 9:17:34 AM - Error bptm(pid=6168) Unable to connect to NDMP server
2/22/2011 9:17:37 AM - started process bptm (5916)
2/22/2011 9:17:46 AM - begin reading
2/22/2011 9:18:11 AM - started process bptm (8724)
2/22/2011 9:18:11 AM - mounting A00019
I can see the tape was mounting on the tape unit drive, but nothing happend.The last step is mounting A00019 not pass to next step.
What can I check? Any Recomendations? Thanks
02-22-2011 09:20 AM
I check the bpstulist -U and appear the NDMP drive attached just to the Master Server. Then Why the Vault job are trying to use a media server? Maibe thats the reason why appear this message:
2/22/2011 9:17:34 AM - Error bptm(pid=6168) ndmp_connect_to_server: ndmp_create_session failed
2/22/2011 9:17:34 AM - Error bptm(pid=6168) Unable to connect to NDMP server
02-22-2011 09:20 AM
Any idea or suggestion please?
02-22-2011 10:13 AM
'fraid I've had no exposure to Vault (nor duplication for that matter!) so can't help there, so just wondering if there was a more fundamental config issue?
02-22-2011 10:55 AM
Any idea or suggestion please?
02-22-2011 11:29 AM
02-22-2011 11:33 AM
No, I receive error 213 when I try to use for a regular backup.
02-22-2011 02:05 PM
Message: no storage units available for use
Explanation: The NetBackup resource broker (nbrb) did not find any storage units
available for use. Either all storage units are unavailable or all storage units are
configured for On demand only. In addition, the policy and schedule does not
require a specific storage unit.
Recommended Action: Do the following, as appropriate:
■ Examine the Backup Status and All Log Entries report for the appropriate time
period to determine the policy or schedule that received the error.
■ Verify that the storage unit’s drives are not down.
■ Verify the following attribute settings for all storage units:
■ For disk storage units, the Maximum concurrent jobs is not set to 0
■ For Media Manager storage units, the Maximum concurrent write drives
is not set to 0
■ Verify that the robot number and host name in the storage unit configuration
matches the Media and Device Management device configuration.
■ Determine if all storage units are set to Ondemandonly for a combined policy
and schedule that does not require a specific storage unit. In this case, either
specify a storage unit for the policy and the schedule combination or turn off
On demand only for a storage unit.
■ If the storage unit is on a UNIX or Linux NetBackup media server, it may
indicate a problem with bpcd. Check /etc/inetd.conf on the media server to
verify that the bpcd entry is correct.
■ If the storage unit is on a Windows NetBackup media server, verify that the
NetBackup Client service was started on the Windows NetBackup media server.
02-23-2011 07:00 AM
We going to check the Fiber attached to my master server. I think thats the problems because I cant use a non NDMP drive (Same STU)
02-23-2011 07:02 AM
I going to use LCP for backup and duplicated data from DXI to tape and use Vault Profile for eject the tapes and create a catalog and reports. Thats the best option that we found.
Any better idea?