04-30-2015 02:02 PM
I can backup the client, loaded the software with all correct master/media servers. Put info in host files.
I need to make exclusions in the host properties, but cannot get it to come up. Take a long time, then says invalid error number.
Can do nslookup with name and IP both ways, no problem. Firewall is on for the client, but an inbound rule is made to our windows media server and IP to allow all TCP ports.
on the media server bpclntcmd - hn server name returns correct name and Ip of client
Any ideas would be great. Thanks.
Solved! Go to Solution.
04-30-2015 10:38 PM
04-30-2015 06:02 PM
What OS is your client?
There are some old threads you can check regarding that error:
https://www-secure.symantec.com/connect/forums/host-properties-returns-quotinvalid-error-numberquot
https://www-secure.symantec.com/connect/forums/connecting-client-invalid-error-number
Worst case, you might need to reinstall the client NBU.
04-30-2015 10:38 PM
05-01-2015 02:25 AM
You may be missing one or more rules, or have one or more mis-configured rules.
Please show your inbound firewall rule(s), for each rule that you have configured for NetBackup.
If you have the letters 'nbu' in all of your NetBackup rule names, then you can list the rule names easily with:
> netsh advfirewall firewall show rule name=ALL | find /i "nbu"
...and then list each of the rules that you created for NetBackup in detail:
> netsh advfirewall firewall show rule name=my-rule-name verbose
.
Please do not list all of your rules or all of the rules in Windows - please only list the rules that you created for NetBackup.
05-01-2015 06:41 AM
Thank you Marianne! you are right, I only added the IP of the media server and not the master into my firewall rule. Once I added the IP of the master server allowing all TCP port communication inbound, I was able to get to the host properties of the client!
You are AWESOME! I truly appreciate your help. Have a great day!