10-05-2010 04:49 PM
Hi
I have successfuly upgraded the VxVM from 5.0 to VxVM 5.1 ..
But during reboot I am getting given below error .
VxVM sysboot NOTICE V-5-2-3410 upgrade was not completed
configuring IPv4 interfaces: eri0 qfe0.
Hostname: sundev1
VxVM NOTICE V-5-2-3369 VxVM upgrade was not completed
WARNING: /pci@9,600000/lpfc@1/fp@0,0/ssd@w50060482cc19c1ec,0 (ssd131):
Corrupt label; wrong magic number
WARNING: /pci@9,600000/lpfc@1/fp@0,0/ssd@w50060482d52de668,0 (ssd141):
Corrupt label; wrong magic number
WARNING: /pci@9,600000/lpfc@2/fp@0,0/ssd@w50060482d52de647,0 (ssd277):
Corrupt label; wrong magic number
WARNING: /pci@9,600000/lpfc@2/fp@0,0/ssd@w5006048acc19c1d3,0 (ssd267):
Corrupt label; wrong magic number
VxVM NOTICE V-5-2-3369 VxVM upgrade was not completed
The system is coming up. Please wait.
checking vxfs filesystems
Running parallel replay fsck ...
UX:vxfs fsck: ERROR: V-3-20003: /dev/vx/rdsk/fsdg01/localvol:Cannot open /dev/vx/rdsk/fsdg01/localvol: No such device or address
UX:vxfs fsck: ERROR: V-3-20003: /dev/vx/rdsk/flashdg/flash01:Cannot open /dev/vx/rdsk/flashdg/flash01: No such device or address
UX:vxfs fsck: ERROR: V-3-20003: /dev/vx/rdsk/orafsdg03/db03:Cannot open /dev/vx/rdsk/orafsdg03/db03: No such device or address
I am starting vxconfigd daemon manually and starting all the volumes and mounting file system manually.
Any idea what could be the reason ...
Thansk
Sukrut S
Solved! Go to Solution.
10-05-2010 09:45 PM
See if you can find the reason for:
VxVM NOTICE V-5-2-3369 VxVM upgrade was not completed
in the installation log: /opt/VRTS/install/logs/installer#######.log
This (old) TN http://www.symantec.com/business/support/index?page=content&id=TECH35947 describes a situation where upgrade _finish did not complete successfully, leaving behind .start_runed.
10-05-2010 09:45 PM
See if you can find the reason for:
VxVM NOTICE V-5-2-3369 VxVM upgrade was not completed
in the installation log: /opt/VRTS/install/logs/installer#######.log
This (old) TN http://www.symantec.com/business/support/index?page=content&id=TECH35947 describes a situation where upgrade _finish did not complete successfully, leaving behind .start_runed.
10-16-2010 07:34 PM
Hi Sukrut,
Can you share with us how you've performed the upgrade?
As Marianne explained, the message is reported because upgrade_finish was not run after upgrade_start.
Check for directory /VxVM## directory, if present rename it. If you haven't configured the product yet,
try # vxinstall to configure VxVM.
Regards
Srini