05-12-2011 02:19 AM
Hi all
I want run command nbsu -t -c but error unknow command nbsu.
I find path #/usr/openv/netbackup/bin/ no cammand nbsu and no path #/usr/openv/netbackup/bin/support
Netbackup version 6.0 install on solaris10
thank you.
Solved! Go to Solution.
05-12-2011 02:57 AM
post titled "DOCUMENTATION AND DOWNLOAD: NetBackup Support Utility (NBSU) Usage and Examples for 6.x. NBSU was released with 6.5, 6.0 MP6, and 5.1 MP7, and replaces what is known as "nbsupport" in previous versions." which leads me to believe that you may not have it by default, depending on your NB version?
Honestly can't remember if I installed it myself or not!
***EDIT***
From one of the READMEs within the downloaded zip:
=============================
IV. INSTALLATION INSTRUCTIONS
=============================
Save a copy of the existing nbsu binary before installing.
Place the correct platform binary of nbsu in the
/usr/openv/netbackup/bin/support/
or
<NetBackup install path>\NetBackup\bin\support\
directory.
nbsu is self-documenting piece of software. Once installed, run
# nbsu -H
to obtain a detailed set of nbsu instructions and usage examples.
So you just copy the appropriate binary from within the downloaded zip into the path.
05-12-2011 02:31 AM
DOCUMENTATION AND DOWNLOAD: NetBackup Support Utility (NBSU) 1.4 - Usage and Examples for 7.x and previous versions
http://www.symantec.com/business/support/index?page=content&id=TECH139912
The man page for nbsu (we're running 6.5.6) stipulates the path as /usr/openv/netbackup/bin/nbsu, but ours actually appears to be installed in /usr/openv/netbackup/bin/support.
05-12-2011 02:48 AM
Hi andy
I not install it , command nbsu need add new program not attached to the installation netbackup ?
thank you andy
05-12-2011 02:57 AM
post titled "DOCUMENTATION AND DOWNLOAD: NetBackup Support Utility (NBSU) Usage and Examples for 6.x. NBSU was released with 6.5, 6.0 MP6, and 5.1 MP7, and replaces what is known as "nbsupport" in previous versions." which leads me to believe that you may not have it by default, depending on your NB version?
Honestly can't remember if I installed it myself or not!
***EDIT***
From one of the READMEs within the downloaded zip:
=============================
IV. INSTALLATION INSTRUCTIONS
=============================
Save a copy of the existing nbsu binary before installing.
Place the correct platform binary of nbsu in the
/usr/openv/netbackup/bin/support/
or
<NetBackup install path>\NetBackup\bin\support\
directory.
nbsu is self-documenting piece of software. Once installed, run
# nbsu -H
to obtain a detailed set of nbsu instructions and usage examples.
So you just copy the appropriate binary from within the downloaded zip into the path.
05-12-2011 03:12 AM
No, am not install netbackup, netbackup version 6 is install long time.
Basic check no command nbsu in path usr/openv/netbackup/bin/ and no path /usr/openv/netbackup/bin/support.
If I will run command nbsu , i must have install NBSU right?
thank you.
05-12-2011 03:17 AM
It's straight forward:
05-12-2011 03:21 AM
Thank you very much andy :- )
05-12-2011 03:28 AM
don't forget to mark post as solution!
If you still have issues with this you know where we are ;)