01-16-2012 01:45 AM
Hi,
i have a policy to backup data and a volume pool associated with that policy, there are 20 medias in volume pool and was working fine but now i m getting status 96 error unable to allocae new media....
however i have check that there are still 4 medias with "0" kilobytes that means medias are empty ryt??
so what will be the prob??
Solved! Go to Solution.
01-16-2012 03:22 AM
Forum updates dont appear to be instant... but there you have it FROZEN media
bpmedia -unfreeze -m O271L4
Do this for each tape or from the Media>Volume Pool view in the GUI and right click Unfreeze
There is a column in Media > Volume Pool view that can show Media Status enable this in the columns layout - again right click in the view Columns > layout...
Also you should investigate why these tapes are FROZEN.
01-16-2012 02:05 AM
At least 2 things to check:
1. That those tapes are available in the tape library
2. That those tapes are not frozen - show the Media Status Column in the library view to see what the Status of the tape is - as you say it has 0 kb I would suspect it has a Time Assigned value but a Status of Frozen. You can unfreeze them but should investigate why they were frozen in the first place
Hope this helps
01-16-2012 02:15 AM
Also check that the media density is the same as the Storage Unit and the tape drives.
Please post the following output for one of these tape:
nbemmcmd -listmedia -mediaid <media-id>
You can also run 'available_media' from cmd (in netbackup\bin\goodies folder) to verify media usage.
PS: Small favour, please: always mention NBU version and OS in all new discussions.
01-16-2012 02:33 AM
marianne,
which media id i have to use in this command??
NBU Version 7 and windows 2008 R2
01-16-2012 02:41 AM
One of these 4 media-id's:
"i have check that there are still 4 medias with "0" kilobytes"
nbemmcmd command is in ...\netbackup\bin\admincmd.
Remember to open cmd with 'Run as Administrator'.
01-16-2012 02:43 AM
Also, run this command on one of the media ids
bpmedialist -m <media id>
Thanks,
Martin
01-16-2012 02:47 AM
hi,
find snapshot of failed job MediaID is "o013l4" however previously it use another media and when that media get full then try for "o013L4" media that is falling in scartch pool.
01-16-2012 02:48 AM
Please send the details and outputs as requested so that we can see the status of the tapes in question
Thanks
01-16-2012 02:49 AM
hi,
yes these medias are in frozen status now what i have to do??
01-16-2012 02:52 AM
hi,
find attached media status snapshot
01-16-2012 03:15 AM
So as i suggested the other media is frozen
You can unfreeze it and see if it works but if it gets frozen again you will need to look into why it is getting frozen
01-16-2012 03:15 AM
hi all,
still noe replies from any one please helpme out
01-16-2012 03:22 AM
Forum updates dont appear to be instant... but there you have it FROZEN media
bpmedia -unfreeze -m O271L4
Do this for each tape or from the Media>Volume Pool view in the GUI and right click Unfreeze
There is a column in Media > Volume Pool view that can show Media Status enable this in the columns layout - again right click in the view Columns > layout...
Also you should investigate why these tapes are FROZEN.