11-15-2012 02:48 AM
Here is the issue with BESR 2010 SP5
after sum days it is again failing with 1 % status only.
Error EBAB0013: A test that safeguards the integrity of the program failed unexpectedly. POSTCONDITION failed, CopyLegacyBootManager::GetDestinationRegion: .\CopyLegacyBootManager.cpp(190): pRegion.
Details: 0xEBAB0013
Solved! Go to Solution.
11-15-2012 09:50 PM
as i said the backup took 7 hours to complete when i see this in morning 2day.(size only 100MB)
after that restarting the server now the incrementals are done properly.
so in my view below steps worked for me
stop all the besr services.
reinstall symsnap.inf drivers
C:\Program Files\Symantec\Backup Exec System Recovery\Shared\Drivers\win32
SymSnap.inf
and reboot the server
11-15-2012 02:56 AM
How often are you seeing this issue?
How many machines affected?
What is being used as the backup destination?
11-15-2012 03:31 AM
this issue seen sum day ago
i tried with installing with SP5 , now after 10 days it is coming once again,
Backup destination is external USB drive,
11-15-2012 04:09 AM
How many USB drives are you using? Are you doing any kind of drive rotation for the backup destination?
If yes, please provide details on how the job is configured and how/when drives are being rotated.
11-15-2012 04:35 AM
only 1 drive is in use, no drive rotations/
job configuration is daily incremental at every 1 hour ,
full backups weekly,
all are working fine but in today morning when the job started automatically it is started to hang on 1% as seen in the image,
also when cheking the logs..it is saying that " incremental recovery point is not created because previous job is still in progress,, "
so it is hang on 1% ..this is coming even after doing all stopping n restarting the besr services, running manual job .also i have reinstall the symsnap.inf driver now just wating for reboot, tomorow i will see what hapeenes......fingers crossed uptill.
11-15-2012 05:38 AM
The hanging at 1% is a different issue which is almost certainly caused by the machine not shutting down cleanly since the last backup. If the machine blue screened, you would also see this issue. If you leave the backup, it will eventually finish but it stays on 1-2% for much longer than it normally would.
The error you mentioned will have to be investigated via a support case.
11-15-2012 09:50 PM
as i said the backup took 7 hours to complete when i see this in morning 2day.(size only 100MB)
after that restarting the server now the incrementals are done properly.
so in my view below steps worked for me
stop all the besr services.
reinstall symsnap.inf drivers
C:\Program Files\Symantec\Backup Exec System Recovery\Shared\Drivers\win32
SymSnap.inf
and reboot the server