What is the best method for keeping the cron working on a second node during failover. I run numerous scripts all day long that are vital to my operation. I essentially need the crontab from node one to copy itself and run automatically on node two d...
What is the starting version of Veritas Cluster Server(in windows, Linux and Solaris ) that supports IPV6?
Hi Guys, I'm trying to add a global route to cluster configuration. I added the following RouteOptions to my Linux VCS main.cf: MultiNICA EdnMNIC ( Device @ronbgmc1a = { eth2 = "10.107.68.24", eth3 = "10.107.68.25" } ...
HI all,I have 2 nodes congifured with I/O fencing, Oracle RAC configuration.the 2 nodes were taken down, node A started.It printed to console:LLT INFO V-14-1-10009 LLT Protocol availableGAB INFO V-15-1-20021 GAB availableLMX Multiplexor availableand ...
Hi,I added a new node to the live cluster. Because of some heartbeat issues, I had to start the HAD on 2 nodes only. I started gab using 2 nodes (gabconfig -c -n2). LLT config can see 3 nodes, however node 3 link shows down, which is expected.My que...
Hi , We have Storage Foundation HA for windows with SQL agents. Its two node cluster. We want to reinstall the OS on one of the nodes.What is the correct steps to accomplish this? After reinstallation, how can we make the node to be part of the clust...
Hi, We have Storage Foundation HA for Windows 4.3 on Win2K3 & SQL with 2 nodes. We want to change the IP address of the Nodes and the virtual IP of the resource group. How can we achieve this? Do we need to reinstall/reconfigure from begining? Pls. h...
Hi we are putting sybase on our red hat linux VCS cluster but i need to add the rpm VRTSvcssy, so that i can import the sybase types etc anyone know where i can get it from ThanksGav
Greetings all:Am working to configure a 2 node Active/Passive Exchange Cluster with an NBU 6 SAN Media Server.Right now (per setup guide), we have two seperate Virtual Server Names; one for Exchange & one for NBU.(Each Virtual Server Name has it's ow...
Has anyone experienced very long boot times for solaris hosts with Storage Foundation 5.0 following changes on the fabric? I am seeing this with Solaris 10 Update 3 on sparc systems. If I boot an alternate disk and remove /etc/vx/disk.info from the o...
Hello, I'm not a mib expert. My in-house HP Openview guru tells me that the OID(SNMP traps)emanating from VCS 5.0(Notifier) do not match the OID descripton from the VCS mibs he installed on HPOV. Here are the mibs he used and we were told these are...
Does VCS 4.x or VCS 5.0 for Windows needs to be installed in a Windows 2003 domain? My system admin experienced some failure when installing the VCS software and she suspects that a Windows 2003 domain controller is required. Can anyone please jusify...
Hello all, I've been advised I might be able to get some help from this forum. I have an issue that I can't figure out the best way to do. I have contacted Symantec Support who have told me they will not support any issues caused by a failure in doi...
Hi Boys and GirlsI have got a 7 node cluster which has been configured with about 17 service groups, within each of these service groups there is an NFS type.I was wondering in creating an NFS proxy so as to reduce the overhead of monitoring several...
We have a 4 to 1 cluster that was set up with both main interfaces on the on-board NIC's rather than one on ce0 and one on the qfe board on sun.How do I change the interface without shutting down the whole cluster and editing the config? I do not hav...
I'm building a 3 node cluster from 2 Sun 280r's and a Sun V440, each with 2 100Mb interconnects and each node connected via FC to shared storage. When I have the 3 nodes generate IO to the shared storage I end up with one node fenced out or otherwise...
Has anyone out there Clustered Solaris Zones and in particular, zones running their own Oracle binaries and dbase instances?! I can see arguments WHY to use clusrted zones (all the benefits of Zones + the HA side) and why NOT to use Zones (longer fai...
I'm hoping that somebody can point me to some information on how to migrate a VCS cluster to a different SAN. We have several Windows and Linux clusters (Storage Foundation HA 4.3 w/MP1 ) that are currently on StorageTek and Xiotech SANs and we need ...
My Friends-I've bonded my Linux interfaces eth0 and eth1 into bond0. I can't seem to find any complete doc in using MultiNICA/IPMultiNICA with a Linux bonded interface in a parallel network service group. Do I even need MULTINICA/IPMULTINICA since Ve...
If I am running Oracle 10gR1 (10.1.0.4) with SFAC 4.1MP1 on a Solaris 10 platform, do I still need to patch the init.cssd.(i.e. patch init.cssd < /opt/VRTSvcs/rac/patch/init.cssd.patch)-ob
| User | Count |
|---|---|
| 119 | |
| 35 | |
| 33 | |
| 29 | |
| 22 |
