12-12-2011 04:41 AM
Hi all,
due to a hardware lifecycle we have moved our master server to new hardware. now we wan't to add the media server including a StorageTek Sl48 TapeLibrary to the new installed master server. But the problem is that we get the following message:
cannot connect to robotic software daemon (42)
We have add the media server as follow:
root@rozrhbckb01 :/usr/openv/netbackup/bin/admincmd # nbemmcmd -addhost -machinename rozrhbckp01 -machinetype media -masterserver rozrhbckb01 -operatingsystem solaris -netbackupversion 7.1.0.2 NBEMMCMD, Version:7.1 Command completed successfully. root@rozrhbckb01 :/usr/openv/netbackup/bin/admincmd #
But we're not able to run inventory robot. Than we recieve the error!
Have someone an idea?
Thanks
Regards, Martin
Solved! Go to Solution.
12-28-2011 12:35 AM
Hi all,
thanks for all your help. The problem was that we have add the media server with the whole release number 7.1.0.2 and not as required with 7.1.
Regards, Martin
12-12-2011 04:48 AM
Make sure the new Media Server is added as a Media Server in the Master Servers Host Properties Server section.
I would then try running the device configuration wizard against the new Media Server to see what that discovers as it may need readding
If the wizard does not show your new media servers name then that is where the issue lies - add it to the host prooerties and re-start netbackup processes to make sure it is registered
12-12-2011 05:02 AM
Define the server to which tape library is connected as device host in vm.conf file under /usr/openv/volmgr/ and then recycle master and media server once.
--Praveen
12-12-2011 05:03 AM
Hi Mark,
when i run the device configuration wizard i can add the robot but i'm not able to inventory the tapes in the library!
Regards, Martin
12-12-2011 05:09 AM
Hi PraveenCH,
were is the vm.conf to update? on media oder master server? the media server is the control host of the robot. i have update the file on both but without success!
thanks
regards, martin
12-12-2011 05:11 AM
also when i try to restart the media server deamon from the master i get the follwing:
12-12-2011 05:33 AM
A bit confused ...
You say you want to ADD media server, but in your 'nbemmcmd -addhost' command you add the media server with the same name as the master?
-addhost -machinename rozrhbckp01 -machinetype media -masterserver rozrhbckb01
So - your master is also your media server? No need to add it as media server in a separate step.
If you have migrated NBU master to new hardware and performed catalog recovery - did you delete 'old' devices before adding the new ones?
Please post output of the following (this will tell us how devices are seen at OS level, how they are configured in NBU and what processes are currently running):
/usr/openv/volmgr/bin/scan
/usr/openv/volmgr/bin/tpconfig -l
/usr/openv/volmgr/bin/vmoprcmd -d
/usr/openv/netbackup/bin/bpps -x
12-12-2011 05:52 AM
Hi Marianne,
there is a little diffrent with p and b in the servers name! rozrhbckb01 is the master server and rozrhbckp01 is the existing media server with the robot attached. Here the output of the commands on the media server:
root@rozrhbckp01 (global) # /usr/openv/volmgr/bin/scan ************************************************************ *********************** SDT_TAPE ************************ *********************** SDT_CHANGER ************************ ************************************************************ ------------------------------------------------------------ Device Name : "/dev/rmt/1cbn" Passthru Name: "/dev/sg/c6t1l0" Volume Header: "" Port: -1; Bus: -1; Target: -1; LUN: -1 Inquiry : "HP Ultrium 5-SCSI Z22W" Vendor ID : "HP " Product ID : "Ultrium 5-SCSI " Product Rev: "Z22W" Serial Number: "HU1017A2NB" WWN : "" WWN Id Type : 0 Device Identifier: "" Device Type : SDT_TAPE NetBackup Drive Type: 10 Removable : Yes Device Supports: SCSI-6 Flags : 0x0 Reason: 0x0 ------------------------------------------------------------ Device Name : "/dev/rmt/0cbn" Passthru Name: "/dev/sg/c6t0l0" Volume Header: "" Port: -1; Bus: -1; Target: -1; LUN: -1 Inquiry : "HP Ultrium 5-SCSI Z22W" Vendor ID : "HP " Product ID : "Ultrium 5-SCSI " Product Rev: "Z22W" Serial Number: "HU1025AUTG" WWN : "" WWN Id Type : 0 Device Identifier: "" Device Type : SDT_TAPE NetBackup Drive Type: 10 Removable : Yes Device Supports: SCSI-6 Flags : 0x0 Reason: 0x0 ------------------------------------------------------------ Device Name : "/dev/sg/c0t0l1" Passthru Name: "/dev/sg/c0t0l1" Volume Header: "" Port: -1; Bus: -1; Target: -1; LUN: -1 Inquiry : "HP MSL G3 Series G.30" Vendor ID : "HP " Product ID : "MSL G3 Series " Product Rev: "G.30" Serial Number: "1025BRZ06T" WWN : "" WWN Id Type : 0 Device Identifier: "HP MSL G3 Series 1025BRZ06T" Device Type : SDT_CHANGER NetBackup Robot Type: 8 Removable : Yes Device Supports: SCSI-5 Number of Drives : 2 Number of Slots : 45 Number of Media Access Ports: 3 Drive 1 Serial Number : "HU1025AUTG" Drive 2 Serial Number : "HU1017A2NB" Flags : 0x0 Reason: 0x0 root@rozrhbckp01 (global) # root@rozrhbckp01 (global) # root@rozrhbckp01 (global) # /usr/openv/volmgr/bin/tpconfig -l Device Robot Drive Robot Drive Device Second Type Num Index Type DrNum Status Comment Name Path Device Path root@rozrhbckp01 (global) # /usr/openv/volmgr/bin/vmoprcmd -d The Media Manager device daemon (ltid) is not active on host rozrhbckb01 root@rozrhbckp01 (global) # /usr/openv/netbackup/bin/bpps -x NB Processes ------------ root 27971 1 0 14:48:28 ? 0:00 /usr/openv/netbackup/bin/bpcd -standalone root 28043 1 0 14:48:29 ? 0:00 /usr/openv/netbackup/bin/bpcompatd root 28109 1 0 14:48:32 ? 0:00 /usr/openv/netbackup/bin/nbsvcmon root 27966 1 0 14:48:27 ? 0:00 /usr/openv/netbackup/bin/vnetd -standalone root 28123 1 0 14:48:32 ? 0:00 /usr/openv/netbackup/bin/bmrbd root 28080 1 0 14:48:31 ? 0:00 /usr/openv/netbackup/bin/nbsl root 28059 1 0 14:48:31 ? 0:00 /usr/openv/netbackup/bin/nbrmms MM Processes ------------ root 28033 1 0 14:48:29 ? 0:00 vmd -v Shared Symantec Processes ------------------------- root 454 1 0 12:05:45 ? 0:01 /opt/VRTSpbx/bin/pbx_exchange root@rozrhbckp01 (global) #
When i try to start tlid on the master server i get the following:
Dec 12 14:51:32 rozrhbckb01 vmd[7408]: [ID 152614 daemon.error] terminating - another daemon already exists (89)
Thanks Marianne for your help ...
Regards, Martin
12-12-2011 06:21 AM
Hi
Just noticed in your screen shot that shows TLD(0) that the column saying "Enabled" says "No"
Check that the new Media Server is not disabled and re-check the robot setup
This could be why the services wont run as something is disabled somewhere.
12-12-2011 06:34 AM
Hi Mark,
the Media Server was an existing one. We only installed the master server new and want add the existing media server. but it seems that i'm not able to bring up the media manager device daemon.
in the logfile on the master server i found the following:
15:32:18.604 [29621] <6> logstderrmsg: No Entries in the Drive Database 15:32:18.604 [29621] <16> TermLtid: Shutting down ltid, ToAnswer = no 15:32:18.604 [29621] <2> vnet_cached_getaddrinfo_and_update: ../../libvlibs/vnet_addrinfo.c.1370: 0: found in cache name: 11.112.88.12 15:32:18.604 [29621] <2> vnet_cached_getaddrinfo_and_update: ../../libvlibs/vnet_addrinfo.c.1371: 0: found in cache service: NULL 15:32:20.616 [29621] <4> TermLtid: chmod dev files ^C root@rozrhbckp01 (global) # pwd /usr/openv/volmgr/debug/ltid root@rozrhbckp01 (global) #
Regards, Martin
12-12-2011 06:50 AM
OK
Can you provide the out put of these:
from the master: nbemmcmd -listhosts
from the master and new media: nbemmcmd -getemmserver
Can you connect to the media servers host properties? If so what is its Master Server set as?
12-12-2011 06:56 AM
Hi Mark,
here the ouput:
from the master:
root@rozrhbckb01 :/usr/openv/volmgr # nbemmcmd -listhosts NBEMMCMD, Version:7.1 The following hosts were found: server rozrhbckb01 master rozrhbckb01 media rozrhbckp01 Command completed successfully. root@rozrhbckb01 :/usr/openv/volmgr # nbemmcmd -getemmserver NBEMMCMD, Version:7.1 These hosts were found in this domain: rozrhbckb01, rozrhbckp01 Checking with the host "rozrhbckb01"... Checking with the host "rozrhbckp01"... Server Type Host Version Host Name EMM Server MASTER 7.1 rozrhbckb01 rozrhbckb01 MEDIA 7.1 rozrhbckp01 rozrhbckb01 Command completed successfully. root@rozrhbckb01 :/usr/openv/volmgr #
from media:
root@rozrhbckp01 (global) # nbemmcmd -getemmserver NBEMMCMD, Version:7.1 These hosts were found in this domain: rozrhbckb01, rozrhbckp01 Checking with the host "rozrhbckb01"... Checking with the host "rozrhbckp01"... Server Type Host Version Host Name EMM Server MASTER 7.1 rozrhbckb01 rozrhbckb01 MEDIA 7.1 rozrhbckp01 rozrhbckb01 Command completed successfully. root@rozrhbckp01 (global) #
from media server host properties:
Regards, Martin
12-12-2011 07:38 AM
can you run tpconfig -l on the Master Server please
12-12-2011 07:46 AM
one other thought - you dont have a firewall on the new Master do you that is blocking comms with the Media Server (or vice versa)?
12-12-2011 08:13 AM
Hi Mark,
yes there is a firewall but we have open the ports which nbu use. Here is the output:
root@rozrhbckb01 :/var/tmp/nbu_7102 # tpconfig -l Device Robot Drive Robot Drive Device Second Type Num Index Type DrNum Status Comment Name Path Device Path root@rozrhbckb01 :/var/tmp/nbu_7102 #
It's a little bit crazy because we have only install nbu on a new server and want to add an existing media server. i just try to reninstall nbu and try it again but with the same result. But now we have another problem:
I dont know what's goes wrong. Normally it should be easy to add an existing media server to a master server.
Regards, Martin
12-12-2011 08:43 AM
I am assuming you have 1556 in your firewall list?
If so then very tempted at this point to do the following:
First turn off the firewalls temporarily
1. delete the drives
2. delete the robot
3. delete the media server from EMM (nbemmcmd -deletehost)
4. remove the media server from Master Host properties
5. restart netbackup on master
6. retarst netbackup on media server
7. add media server to master host properties
8. add media server to EMM (nbemmcmd -addhost)
9. restart netbackup on master
10. run device config wizard
11. cross fingers and see what happens
12. if it works turn firewalls back on to see if it stops working
12-12-2011 08:51 AM
The syntax to set a Media Server as "active for tape" is as follows:
nbemmcmd -updatehost -machinename <media_server> -machinestateop set_tape_active -machinetype media -masterserver <master_server>
http://www.symantec.com/docs/TECH56911
12-12-2011 09:22 AM
A 1-character difference in hostnames always catches me... ...
What happens if you kill vmd on media server and start it with 'ltid -v'?
Please check /var/adm/messages on media server as well as PBX log on master for errors.
Have you verified correct bp.conf entries on master and media server?
It seems your master has multiple NICs - what about the media server? Can you verify that same subnet is used for commes between master and media server?
Have you tried 'bpclntcmd -ip <hn>' and 'bpclntcmd -ip <ip-address>' in all directions as well as 'bptestbpcd -host <server-name> -verbose -debug' in all directions?
Please ensure that you have admin log folder on master and media server. Connection attempts at server level will be logged in admin log.
12-12-2011 11:24 PM
Hi all,
we could solve the problem. Thanks for all your help. Now we run the catalog restore but it run since last evening 5 p.m.! How long does a restore of a catalog normally take?
Can i check the progress via command line or what else can i do? It still hang on the same position. Is it possible the cancel the restore?
Regards, Martin
12-12-2011 11:52 PM
Extreme/excessive measures?
If you chose to do a full recovery (images and EMM) it will take a long time, depending on images database size.
You can 'tail' the restore log on the master server. Look for something like this:
/usr/openv/netbackup/logs/user_ops/root/logs/Recover#######.log