cancel
Showing results for 
Search instead for 
Did you mean: 
NetBackup

Discussion Posts

Subscribe to NBU notifications

In case you are not aware - you can subscribe to NBU notifications over here: https://sort.veritas.com/spec_doc Hopefully NBU 9 will be added to the list soon.

Marianne by Moderator
Partner    VIP    Accredited Certified
  • 5021 Views
  • 1 replies
  • 17 kudos

Resolved! status 237 after adding new schedule

I have a policy for an exchange dag, where i orginally had the full.  upon complettion of the backup, i added a new schedule for the daily differential backups.  When i go to run the schedule i get a 237 error code.  But all of the settings look righ...

database backup failing and filesystem is ok

  Hello everyone ,   I have some database backups failing with code 6  and the filesystem backup for the same clients is fine !   EXIT STATUS = 6: the backup failed to back up the requested files   any idea about my issue ?   Thanks

Sara_88 by Level 3
  • 787 Views
  • 8 replies
  • 1 kudos

Resolved! bpminlicense output

Hi Marianne, I have asked one of our onsite team to tell me one of the SAN media server.I ran bpminlicense from master server for that san media server. unx23.national.com is the SAN media server. Now how I can check why this is the SAN media serv...

Resolved! netbackup san media server

Hi All, I need a command or script that I can run onm y solaris and Linux master server  which can provide me the output that distinguish between SAN media server and Normal media server.   NBU 7.1 Sloaris and Linux

Exchange GRT backup and bpclntcmd -pn

Summary: Our Exchange DAG is conformed by four Mailbox nodes, two of them are being backed up fine through GRT backups but the other two are giving us trouble. I did some troubleshooting and found out that basic commands like "bpclntcmd -pn" and "b...

Alexis_Jeldrez by Level 6
Partner    VIP    Accredited Certified
  • 816 Views
  • 3 replies
  • 0 kudos

Resolved! requested media id is not assigned to this host in the EMM database

Hello, I need some on help to fix issue in the media related. In the scratch pool haveI have enough tapes loaded and most of tapes shows below mesg. "requested media id is not assigned to this host in the EMM database" I have tried below procedure...

adityakm by Level 3
  • 12168 Views
  • 6 replies
  • 1 kudos

Resolved! NBU 7.6.0.2 can't list VM's

Hi, i installed a new NBU 7.6.0.2 environment. For the first time my masterserver is also mediaserver. We want to backup a large number of VM's of two or three vCenter. Therefore i take the configuration in the masterserver properties, so i add the ...

Resolved! jnbSA crashes after 7.6.0.1-Update...

Hi, after upgrading from v7.1.0.4 to v7.6.0.1 my Java-console crashes all the time: *** hellboy 55# jnbSA& [1] 7506 hellboy 56#          Starting administration console version 7.6.         The log file for this execution instance is         ...

7.6.0.1 - Windows 2012 - status 13 after 2h

Hi, I have a problem with Windows 2012 netbackup 7.6.0.1 client (fileshare cluster) backup via media Win 2012 7.6.0.1 server. Client and media server are Hyper-V machines running on the same hypervisor. No firewall between. Policy type: MS-Windows...

dokhook by Level 3
  • 300 Views
  • 4 replies
  • 0 kudos

LiveUpdate - How to set capacity required for clients?

Has anybody successfully reconfigured LiveUpdate for NBU clients to accept a different free space size for the temporary location of the upgrade process? RHE Linux For RHE Linux the default for the free space requirement  for /tmp just over 2GB.  I...

Jim-90 by Level 6
  • 191 Views
  • 2 replies
  • 0 kudos

Resolved! Problem with creating SRT at AIX 6.1 using NetBackup 7.0.1

My master and media at windows 2008 server with netbackup 7.0.1 My AIX client is AIX 6.1.4.7. I want to create SRT on that client using netbackup 7.0.1. I successfully install 7.0 and upgrade it to 7.0.1 on AIX client. But while I am going t creat...

Tauhid by Level 4
  • 563 Views
  • 4 replies
  • 0 kudos

Unable to register the BMR server

OK, I started configuring the BMR but unable to register the server.  Two problems I am facing right now: 1)  Shown in the screenshot ( pls see the attached screenshot) 2)  The "NetBackup Bare Metal Restore Boot Server Service" stops automatically...

Incremental / Differential backup finish error 130

    Hello Everybody   I am running exchange 2010 on windows 2008 server backups from netbackup 7.5.0.5  running on solaris. The full backup work well but the incremental and differential backups finish with the error 130. I have found lots of TN...

Resolved! Error Code 27

Windows Clients failing with Error Code 27. Need best possible way to resolve.

Bkp2020 by Level 3
  • 4915 Views
  • 9 replies
  • 1 kudos

Resolved! Missing Path in Tape Drive

We have SL8500 Tape Drive. 2 Drive Paths are Missing. SAN Team asking for WWN and HBA for 2 missing paths. How we identify WWN and HBA for Each Drive Path for the Drive.

Bkp2020 by Level 3
  • 1110 Views
  • 4 replies
  • 0 kudos

Resolved! Which tapes are ACTUALLY required for a restore operation?

When I initiate a restore operation, a list of "required" tapes is generated, usually 5-25. However, I have never seen more than 2-4 tapes actually used in the restore process. Is there a way to determine the ACTUAL list of tapes required? Using NetB...

downhill by Level 3
  • 1085 Views
  • 11 replies
  • 0 kudos

Resolved! Baremetal restore does not work

All,   I'm have a Redhat 6.4 server and I'm trying to do a Baremetal restore, but it fails on two accounts.   Firstly it says that the disk size is dissimilar, yet I'm restoring to the same box, with the same disk and I'm not talking a replacement ...

Resolved! SQL backup exit status 83

Hello Marianne. SQL Version is SQL 2008 R2. Now backup is failing with error code 83. Detail status: 05/22/2014 07:14:12 - Info nbjm (pid=11266) starting backup job (jobid=1489026) for client fngwengdbpr02, policy FNFG_OPT1_LCKPRT_SQL_WEEKLY_fng...

Resolved! Restore from more masters

Hi everybody, after days of struggling I decided to ask here, as I believe there has to be some very simple solution which is eluding me. My Linux client has multiple SERVER entries in bp.conf for our multiple master servers. I'm trying to accomplis...