Appliances

Resolved! Flex appliance 5250 adding a node

The company I work for has two new flex-appliance 5250's. I have successfully configured the IPMI and HOST0. Both are reachable over the network. I trying to add a node via my browser pointing to the HOST0. I've done all steps, create network, create...

Trouble to understanding warning status of disk drive

Hi folks.I have trouble to understand a warning status of a disk drive in our 5240 appliance.In the web interface the disk [44:11] is marked "yellow" (please see screenshot #1). Is the reason therefore because the disc was former global hotspare in s...

Can't login hostadmin after reimaging 2.0 to 2.1 from Flex Appliance 5150

After reimaging flex appliance 5150 to 2.1, Can't login hostadmin.I entered password default. (P@xxxxxx)The shall said 'login incorrect.'I tried to login before password that i changed, and that happend again.Funny Things that i tried login root with...

Resolved! 3.3.0.1 still supported on 5230 hardware

Does anyone know if Veritas will continue to support v3.3.0.1 appliance instances even if the 5230 hardware underneath has gone EOL ?

Log4j vulnerabilities mitigation/remediation hotfixes

Please refer to the following master tech article: https://www.veritas.com/content/support/en_US/article.100052070 The respective appliance-specific tech articles are being updated on an ongoing basis with latest information about remediation hotfixe...

Checking for primary node in a media server cluster

Greetings, NBU 5340 appliances as media servers and are clustered and setup as primary and failover. Running 3.3.0.1 / NBU version 8.3.0.1 I'd like to know what the command line is to check which node is primary from the elevated prompt.

Resolved! configure Flex Appliance 5250

Hello all, I have a project to configure a Flex-Appliance. The documentation is not very clear, is it possible to guide me a bit so I can configure the box myself? I did configure non-flex-appliances, but the flex ones are rather different.Regards, R...

Netbackup 5240 Appliance change backup network

HelloWe have 8.1.2 Windows Master and 3.1.2 5240 Appliance. Appliance with L config. Until this time we were using eth1(1g). We plug FC(eth7 10g) etherhet card and assing IP on it. Ip config:eth1 192.168.1.73/24 GW:192.168.1.254 eth7 1291.68.1.79/24 ...

NetBackup 5240 appliance with tape via Fiber

Hello,I have a NetBackup 5240 appliance and I want to configure tape backup. I have connected the tape library to slot 6 port 1 (initiator) via 8GB fiber (does not go through SAN switch but directly connected to the appliance). I then ran Manage > Fi...

Bandwidth limit when configuring air

hiCurrently, I have two net backup appliances, one for backup and the other for DR.However, the network bandwidth in between is too narrow, so bandwidth must be limited, but I have not been able to find any related data.Please help from many people.

Appliance 5340 Disk Pool Limit I/O Streams per Volume recommendation

Hi,Please your recommendation: we have two 5340 appliances (1.4TB RAM, 2 primary/expansion storage shelfs = 980TB), what is the Disk Pool Limit I/O streams recommended? we actually have 120 per volume and our SLPs are waiting for resources. Our WAN h...

Lenovo Server with Veritas Net Backup License

Dear Team, kindly advise which Lenovo server is compatible with Veritas Net backup license. i need server of 36 TB, i need use Veritas Netbackup License with Lenovo Hardware

about Auditing the NetBackup admin account

Hi all,Auditing the NetBackup admin account in the NetBackup Appliance Administrator's Guide shows the output when I run the bbps command, but not in my validation environment.https://www.veritas.com/content/support/en_US/doc/75895731-141133026-0/v90...

Compliance questions

We are using NetBackup 5240 and 5250 appliances. In one of the compliance meetings I was asked to provide below details . Can someone help with those please.Multi factor authentication to backup systems/appliances?Are backups stored on disks/tapes im...

Netbackup Offsite backup

hi, I have two identical NBU Appliance 5250. Need to configure additional backup copy (secondary copy) to offsite. I wish to use Windows VM and install NBU Master and Media server on offsite location. Secondary copy will be configure on each applianc...

NetBackup Appliance 5250 versus NetBackup Flex Appliance 5250

Hi All,I would appreciate if someone can help me in order to propose the righ appliance to the customer: when we would had to propose a NetBackup appliance 5250 and when NetBackup Flex appliance 5250. Thank you very much for your help.Best regards, ...

Resolved! Monitor Veritas appliances using kpi

Hello Voxers, We are trying to monitor a Veritas appliance using PRTG Network Monitor as a monitoring tool. My questions are the following: Is this possible? can we monitor the disks of a veritas appliance using OIDs? What are the minimum rights for ...

Rename this Forum

Can we please rename this "Appliances" forum to "Flex Appliances" and create a new "Access Appliances" forum. Thanks.

Flex instance upgrade package for version 8.3 needed.

We have flex appliance model is 5340 and appliance OS version is 2.0. We have media server instances on the flex appliance(both msdp and cloud catalyst) at version 8.2. We are going to upgrade the flex media server instances to version 8.3 . But I ...

Veritas Flex Appliance with Netbackup 8.3

Hi,we have configured an media server's instance on flex appliance 5340, with Netbackup 8.3.Outside there is a master server also 8.3. In order to add clients, and populating file hosts on media server, we read to manual configuration that we must of...

VOX

Discussion Posts