Release Notes for Veritas System Recovery 22 : v22.0Veritas™ System Recovery 22 Readme : v22.0Veritas System Recovery 22 Licensing Guide : v22.0Veritas™ System Recovery 22 User's Guide : v22.0Veritas™ System Recovery 22 Manager Readme : v22.0Veritas™...
How to backup to Azure using Veritas System Recovery: https://www.youtube.com/watch?v=ulOdmKfD8Qg How to backup to Amazon S3 using Veritas System Recovery: https://www.youtube.com/watch?v=u3ptziLui0U How to perform a Bare Metal restore using Veritas ...
One of my clients has a Dell Poweredge 2950 Series III server with the OS as Windows Server 2008 32 bit with Dell Open Manage Administrator software installed with a Perc 6i -LSI Raid controller. It does not have a tape drive as it is not a backup s...
Our post command performs an action (disconnects a share) that disconnects BESR from the backup file it just created. This causes BESR to report an error and to be unaware of that backup file. Is this behavior by design?
Is it possible to verify an existing recovery point using the BESR 8.5 console?
I'm using windows 2008 enterprise edition x64, processor intel, ram 4Gb. When recovery to other computer different HW error. Recovery success but after reboot when install component, error show up ( windows setup could not configure windows to run on...
I am trying to figure out a way to make the following solution work for my customer: Currently, they have SBS 2008 and have two External USB drives. They have been using the built in SBS 2008 backup to backup to the USB drives that they swap every ni...
Hi, I do have the problem that the server has a Promise S150 TX4 raid controler which is supported by BESR8.5 the compatibility check doesent say anything about a missing driver.But if I boot from the recovery CD I cannot see the raid array and for t...
I have just installed Windows Xp Sp3 Ghost v14 on Asus ABN-E AMD 3000+ 2G RAM. The system drive is a Maxtor 20G ATA. After I finished the job I tried to back up my work with one time backup of the sytem drive C: to another shared network drive (later...
I'm having trouble activating BESR 8 on Windows Server 2008. All I seem to be getting is the red "Cannot install license" taskbar popup and the "Cannot activate this product using license key xx-xxxx-xxxx-xxxxxx" I'm not sure why it's not detecting ...
Fresh from my Verizon routing issues, I have a question that I'm pretty sure I know the answer to but just want to be sure my understanding is correct. I have setup my backup job to run every night. It is setup to create a new recovery point every m...
What TCP/UDP ports are used when the BESR 8.5 GUI connects to another machine? Are they different than the ones used by the BESR Manager?
After a hardware failure of my physical server I'm trying to restore my v2i file to a HyperV .vhd machine. The restore is succesfull, I selected, restore anywhere, Delete drivers and Prompt for drivers. After reboot my screen turns black, no Bios mes...
Alright, I feel like a complete dork but where are the manuals for BESR? I cant get at through the help window and when I try to ftp them it always fails.....help please!?
This is a fresh, clean install of SBS 2008. I'm trying to download and install updates using LiveUpdate. It downloads a file that's 11,136.8 KB and then during installation I get a Windows Installer popup window that says: Fatal error during installa...
BESR 8.5 attempts to backup to the RDX cartridge but appears to corrupt the RDX cartridge and then the backup job fails with an error. BESR starts to backup to the RDX drive then fails and logs the following error:Info 6C8F1C2F: A recovery point oper...
the company where I contract for is building an A/V power workstation;since I'm the one who will be primarily using it I'm asking for BESR Desktopbut I need to know which way to do this; do I install the BESR in XP-64 and pop out of the virtual & bac...
Hi allOK here the plan I trying to Restore/ upgrade a windows 2000 file server to a windows 2003 server have built os driver and installed all patcheswindows 2003 new servernow I want to be able to Restore the data drive from the old windows 2000 ser...
I'm able to restore to a virtual machine (s/w is microsoft virtual pc) with the restore anywhere option. The resultant (virtual) machine does not boot. If I select safe mode, I see all the text scroll by and then it gets stuck on acpitabl.dat. Any id...
I will try to make this short: Brand new installadtion of BESR 8.5.1 on a 64-bit Windows 2008 Server (Standard); I'm using the BESR Manager to manage 13 Windows servers, with Windows 2008, 2000 and 2003 "clients. Here's the deal: I have new backups c...
Can they both be installed on the same server? I have a fully functional installation of Endpoint Protection Manager 11.0.x on a Windows 2003 server. I recently installed Backup Exec System Recovery Manager 8.5.x on the same server. When I try to o...
Hi there, First time posting and hoping for some help here. i'm testing a migration of our Windows Server 2003 O/S from a set of smaller drives to some bigger ones. The Copy my hard drive function works, but i cannot select copy MBR under advanced ...
