Public Article on NetBackup Appliance Maintenance Releases
Please check out this living document. Welcome all feedback. https://www.veritas.com/support/en_US/article.100049781
Please check out this living document. Welcome all feedback. https://www.veritas.com/support/en_US/article.100049781
NetBackup Appliance 3.3.0.1 Maintenance Release 1 (MR1) is now available in the Download Center. https://www.veritas.com/content/support/en_US/downloads/update.UPD236988 Please install it *before* installing any other EEB/HotFix. If you install it af...
Please note the the following link: https://www.veritas.com/content/support/en_US/article.100038989 This is the *only* page that will provide Late Breaking News and Important Updates about NetBackup Appliances. Every effort will be made to keep this ...
Hi guys, I just create a zone between AIX (LPAR), 5230 appliance and a storage like this As you can the AIX server has two FC adapter each one belongs to a zone,but sometimes I lose visibility from netbackup so I have to go to the client and ru...
Hi guys, My enviroment has 6 5230 appliance, appliance 1 and appliance 2 are working for backups, appliance 3 and appliance 4 are woriking for replications only, and appliance 5 and appliance 6 are replications targets. I create a SLP like this,...
Dear All, my enviroment netbackup appliance 5220 aix 6.1 we have application named Autoline ADP which is used for BMW car inventory system that application has only flat file system task need to backup and restore the flat f...
We have a replicated setup between 2 x 5220 appliances (SW version 2.6) – all I would like to know is if I turn on BMR support on our primary appliance, do I need to turn this support on the secondary unit?
Hi, We have new Network infratructure being implemented where the traditional method of stacking switches to allow us to LACP across multiple switches, has been replaced with a new NEXUS 9000 setup which now uses something call VPC (Virtual Port Cha...
We are running NBU Appliance based environment ver 2.6.1.1 and NBU ver. 7.6.1.1. We are required to enable auditing to capture who changed what policies and when. We also have OpsCenter Analytics that I am sure can possible be useful. Appreciate yo...
Got following errors in our details on a solaris backup. Im on an appliance, 5220. We are running 7.6.1.1. Link to 2060019 in error message is a cyclical redirect. I saw in other posts that this was a problem in the pre 7.5.0.4 world, but was suppose...
Hi all, I am in need of confirmation or explanation on some logging I see in the detailed status. When I see this in the detailed status (for an Incremental backup): 04/15/2015 07:02:43 - Info bpbkar (pid=98149) accelerator sent 1115317760 byte...
Hi, I am running with a POC with Appliance 5230 installed as Master/Media with MSDP. I enable Encryption on appliance: Main_Menu> Settings> Deduplication> Tune Encryption Enable. Now, how to I ensure that images on pool are encrypted, and how do I...
Hello I have tow doubts about 5230 appliance (ver. 6.5): 1) To activate de BOMC option is not neccesary a license, is it? 2) Turn on the "BOMC option" cause some kind of interruption in the appliance (Stop de active polici...
A 5020 appliance is connected to 3 media servers. the 3 media servers are configured as storage servers and puredisk disk pool is created and allowed access to all the 3 media servers i have created a single storage unit, and selected to use all the...
Hello All, How to check Ping, Telnet, Bptestbpcd commands in Netbackup appliances commandline. Thanks
where from the Clish, is the "incoming_patches" folder? thanks Pat
Hi All, as we have requirement to attach Tape drive lto 6 of hp model “HPLTO-6-ULKTRIUM 6250 SAS EXTERNAL TAPE DRVIE ” with netbackup appliance 5220 interface 6Gb/s Dual Port SAS interface It can be attached and used with appliance 522...
Im trying to add in a new 5230 appliance as a media server to my 7.6.0.3 environment and im stuck at figuring out what type of storage pool to choose. i already have a 5200 in place that i have been using for almost 5 years and it setup as puredisk ...
Hi all here's my problem. I need to know steps "how to do". till Nov 15th master NBU 7.5, win 2003 OS. master plays role of master+media server, name MMBK01 which is robot control host for IBM tape libraries tld 0 n tld 1. i got 1 nbu appliance N...
Hello, Recently got some new 5230 Appliances and am looking to deploy the VMware Plugin. Is it possible to enable the Web Services on Netbackup Appliances? I tried poking around the appliance and couldnt find a place where this could be done. Thank...
Hi, I'm intending to implement two NetBackup domains, each of one RHEL master server plus three x NB5230 v2.6.0.2 (three media server appliances at each site), split across two sites - the only NetBackup traffic between sites is expected to be AIR, ...
Help! Netbackup Appliances 5230 2.6.0.2. One of our appliances houses ms-standard windows all local drives backups and vmware snapshot backups. Backups run at good speeds however as soon as we start our slps to copy the data from the msdp to tape t...
Hello, We are running Netbackup Master Server with version 7.6.0.3 on Windows Server 2008 sp1 r2 and our Netbackup media servers are Ntebackup Appliances 5230. Recently, I read about the Call Home feature that supported by the Netbackup Applia...