Public Article on NetBackup Appliance Maintenance Releases
Please check out this living document. Welcome all feedback. https://www.veritas.com/support/en_US/article.100049781
Please check out this living document. Welcome all feedback. https://www.veritas.com/support/en_US/article.100049781
NetBackup Appliance 3.3.0.1 Maintenance Release 1 (MR1) is now available in the Download Center. https://www.veritas.com/content/support/en_US/downloads/update.UPD236988 Please install it *before* installing any other EEB/HotFix. If you install it af...
Please note the the following link: https://www.veritas.com/content/support/en_US/article.100038989 This is the *only* page that will provide Late Breaking News and Important Updates about NetBackup Appliances. Every effort will be made to keep this ...
Hi Just wondering if anybody was successfully monitoring Netbackup Appliances using SCOM 2012 R2. I tried using the SCOm Discovery to monitor one of ours, treating it just like a linux server, and received an error saying that the server refused to...
We have configured new 5230 appliance recently and SAP Online backup and Oracle Archive logs backup. i want to verify or view the contenet backuped up by these policies. like client wise list of backuped up archive logs, list of all backuped up arc...
The IP addresses and URL's that Appliances use to phone home are changing: https://support.symantec.com/en_US/article.INFO2803.html
Hi All, Can someone please guide on the below alert i have received today not sure If I need to escalate Symantec support to check it. +-------+ | Enclosure 1 Fan Information | |+-----+| ||ID | Status | Speed | LowWaterMark | State | Ackn...
Hi, Recently we have two new appliances 5230 and in the integration with the supervision system we will need to test the SNMP traps. I read the documentation and I don't found nothing about to send a test trap to test SNMP. How i can test the SNMP ...
We are running NBU Appliance based environment ver 2.6.1.1 and NBU ver. 7.6.1.1. We are required to enable auditing to capture who changed what policies and when. We also have OpsCenter Analytics that I am sure can possible be useful. Appreciate yo...
Hello everyone, we received from our Netbackup Appliance 5230 a warning regarding the temperature from P2 Therm Margin (Hardware Error/Warning(s) Notice). Temperature: 0 degrees C LowWaterMark: -128 degrees C HighWaterMark: -15 degrees C S...
Hi all, I am in need of confirmation or explanation on some logging I see in the detailed status. When I see this in the detailed status (for an Incremental backup): 04/15/2015 07:02:43 - Info bpbkar (pid=98149) accelerator sent 1115317760 byte...
Hi all, One of my NetBackup appliances was recently upgraded and after that, it's status LED in the Symantec Remote Management console has been solid amber. What could be the steps that I can follow in order to resolve this issue? Also, I generated...
Hi all! I have multiple NetBackup 5230 Appliances and I just added new trays, NICs and HBAs. All the rest are working fine, however 1 of my NBU 5230 appliance is showing the flashing green LED (degraded performance). I accessed it via the web conso...
Hello, I have a very strange problem over here where one of my servers does something abnormal... Once I reboot the server and run the backup (full) then I get full speed over 600Mbit/sec meaning it gets done in about 6 hours. However once the back...
Hello All, How to check Ping, Telnet, Bptestbpcd commands in Netbackup appliances commandline. Thanks
I understand that appliance call home needs access to: http:// www.symappmon.com ...and this tech note describes how to troubleshoot Call Home: http://www.symantec.com/business/support/index?page=content&id=TECH152748 A couple of questions if ...
Hello, I would like to get the access to the same deduplication (reports --> deduplication) reports through remote commands or API. Thanks, Boris
We have this weird appliance issue - wondering if anyone else has experienced this recently (maybe due to https://symappmon.com not working?) The 5230 Appliance is on 2.5.4 - the status is perfectly green. this happens when i try to verify the pr...
HI All, I'm struggling to get SNMP V2c configured on my Solarwinds box for both of my NBU 2.6.0.3.. appliances. I've configured a Community String & added the SNMP server details on both devices, but when I try to add them as nodes, Solarwinds is...
My current monitoring software scrapes the windows Event Viewer, problem is all netbackup jobs are recorded on a Linux Media Server. Is there a way to send stats of the backups from the Linux Server to a Windows server to be viewed in event viewer? ...
Ok so the gist of it is we have a NetBackup Appliance that is Linux and most if not all servers being backed up are Windows. We want to be able to use the Application log in Windows Event Viewer to determine if a backup has failed with our monitoring...
I've got several 5220s and when I check "top" on them I see that they are all using all available memory and are into swap. I will be restarting these appliances in the near future so will be able to monitor this usage more closely, but in your expe...
How often will Rebasing run on my 5220? is there a way to monitor other then crcontrol --rebasestate. I'm looking to see when it started and how far along it is in the process. Also can I be notified when it starts and stops? Maybe with opscenter? T...