Public Article on NetBackup Appliance Maintenance Releases
Please check out this living document. Welcome all feedback. https://www.veritas.com/support/en_US/article.100049781
Please check out this living document. Welcome all feedback. https://www.veritas.com/support/en_US/article.100049781
NetBackup Appliance 3.3.0.1 Maintenance Release 1 (MR1) is now available in the Download Center. https://www.veritas.com/content/support/en_US/downloads/update.UPD236988 Please install it *before* installing any other EEB/HotFix. If you install it af...
Please note the the following link: https://www.veritas.com/content/support/en_US/article.100038989 This is the *only* page that will provide Late Breaking News and Important Updates about NetBackup Appliances. Every effort will be made to keep this ...
It seems here recently that when Image Cleanup jobs run all of my backup jobs freeze until it is done. This is causing my backups to either sit active for a very long time or fail all together. the appliance is a 5200 running 2.5.1. i just recently...
A customer who was moving to a Netbackup 5230 from a Solaris Media server asked me if it's possible to create a share from the dedupe or advanced disk pool on the Appliance. The idea is to copy data directly to an nfs share on the media server to be ...
Does anyone have a walk through on enabling tape drive compression(NOT software compression)? I've been doing some research and it appears commands such as: sdparm - <device>, and sginfo -a displays the following information: Data compression (SSC) ...
hi experts i am using nbu appliances ,and have exported the bppllist file for some reason when i ran it on tool of policy list parser it is giving me errors of run time for further analysis and references i am attaching the file and error shot i re...
I do not have analytics I need help as I have created individual backup policy alerts (per client and policy) that trigger on a backup completion and anything that is >0 to allow me to capture failures - and these would email to a mailbox where ano...
Is there any way to add a query to MIB list to recive an alert in trap reciever(SNMP server) from DeDupe appliance & 5220-MSDP, whenever entire pool goes down(Situation when backup fails with status 2074). How can I change the priority for MIB ...
Hi, I have three questions about A.I.R with NetBackup Appliance. 1. Can I use Auto Image Replication from a NBU Master server(Solaris OS) at a production site to a NBU Appliacne 5220 that configure as a Master server at a DR site? 2. Can I use Auto I...
We have six appliances (5020) with 32 TB each for total dedupe capacity of 192TB without requirement of replication. We can combine these appliances in following proposed patterns A) Single 192TB global dedupe pool combining all six appliances B) Tw...
Hi I m using a NBU Appliance 5220. I configured the smtp for Software admin and Hardware admin in the web interface. I received the test emails. But I do not receive : Host information such as: ■ Disk information. ■ Overall backup status. ■ Resu...
Hello All, I need to know what are the required Licenses of Netbackup, using Netbackup Appliance 5220 to support below. - Backup 10 TB. - Enable encryption. - Enable De duplication. - Backup Via SAN. - Three years support. Is it the same or there is ...
Doesn anyone know how to configure the IOIO port on the 5200. Is it just a standard ethernet port that provides console access? In the network settings nothing shows as a configurable console port.
On the netbackup 5200 appliance, it states that it has the duplication procedures and replication, but when backing up the system to the 5200 , once the backup data its stored on the appliance does it replicates its self from the appliance to the ded...
Hello experts, Is there a way to observe FC traffic on 5220? Can I tell that the data coming IN or going OUT of te 5220 is over FC or ethernet? Regards, ESM
Guys, What is the benefit of installing OST on NetBackup 52xx appliance? Thanks
Hi. Have 2 x 5220 appliances setup as 2 master servers in DR and Primary site connected via LAN/WAN over our production network. 1. Need to know how can be configure the AIR to take place not over the pimrary LAN/WAN but over a secondary network. I h...
Is anyone with a 5200 doing SAN Client backups? I am being told by support that this is not possible with a 5200 becuase it does not come with an HBA in slot 2. My appliance came with a 10gb hba in slot two but im not seeing it under the FC > show
Hi, With the impending end of life for the HP VLS family I am now looking at alternatives for our Backup Environment, HP have given us the pitch on their B6200 StoreOnce systems which can be set ups as VTL / NAS or StoreOnce Catlyst (Disk), does anyo...
We have several 5220 appliances on an isolated network with no outside access. I tried to uncheck the box in the appliance setup to disable Call Home, but it keeps re-enabling it. How does one get that to stick? Appliance is on 2.5.x code release.
Hello, I have searched the documentation, knowledgebase, and the forums, and I cannot find detailed information on how to configure and use the IPMI port on a NetBackup Appliance 5020 running v1.4.1.1. I did find steps to configure the port in the De...
Can someone point me to either a forum post or a KB article that walks through setting up AIR between two 5220 Media Servers that are in two different domains? I see the Admin Guide (great overview but really short on details), the one video of AIR ...