Release Notes for Veritas System Recovery 22 : v22.0Veritas™ System Recovery 22 Readme : v22.0Veritas System Recovery 22 Licensing Guide : v22.0Veritas™ System Recovery 22 User's Guide : v22.0Veritas™ System Recovery 22 Manager Readme : v22.0Veritas™...
How to backup to Azure using Veritas System Recovery: https://www.youtube.com/watch?v=ulOdmKfD8Qg How to backup to Amazon S3 using Veritas System Recovery: https://www.youtube.com/watch?v=u3ptziLui0U How to perform a Bare Metal restore using Veritas ...
Hi all, In need of some help. Basically, we have 2 physical servers. On them, we run 2 virtual machines each. We run 3 versions of Symantec System Recovery 2011 on these virtual machines and run backups every night to a NAS drive. So what I'm tryi...
My computer crashed and I can't reinstall it from my backup so I need to make a new installation when my new SSD disk arrives. Do I need to do something so I can install my license again or will it work anyway? /TB
We've bought SYMC SYSTEM RECOVERY DESKTOP 2013 and having issue to restore using USB media but have no issue if using DVD. We're trying to backup/restore Windows 7 image. We've already tried to restore using couple different approach as follows: Ba...
I have a Thinkpad T530 and I have several backups taken with SSR 2013. I am trying to restore a complete backup to a new disk but it fails complaining on UEFI/BIOS problems. It seems to me that the SSR 2013 recovery CD loads from BIOS instead of UEFI...
dear all, its been a while since I last looked into this logs and cannot recall where and what to look for. I need to verify if a system has been restored from a BESR backup for auditing purpose. 1- what log file can I see that the system has been...
Hello, I have a server to restore that has a partition size of 410GB, this partition contains 250GB of data. If i restore my server, can i restore on a 300GB disk size or do i need atleast 410GB disk space for the partition? The server conta...
Hello, We are testing for a few customers the restore procedure for the first time. Those customers have made backups with Symantec System Recovery over the past 3 years. Hardware: HP Proliant ML350 G6Raid 5, 4x 150GBDisk space: Total: 410GBU...
I am having the issue with Windows Server 2000, I restored the system with Ghost 2003, after restoring, Windows does not boot. I checked internet for solution and find several method to boot Windows,one method was to run Ghreboot which did not work, ...
Hi everyone. I used to use Symantec ghost to clone PC's here and then restore to more PC's to join our domain. I would then use Ghost walker to change the SID's of the new PC's so as to avoid any conflicts. I have heard that this same process...
hi im in a disaster recovery situation , when i want to recovery my files from system recovery backups, system recovery need password and i forgot that password. what can i do? plz help me.
Hi We have given SSR 2013 For Linux edition to a customer. Our sales people didnot notice that this does not support disimmilar hardware. Now customer wants us to show the recovery to disimmilar hardware and resolve the issue. Need some out of b...
Dear All, Spec: Windows SBS 2011 as an A/D and Exchange server Outlook 2007 Installed. Symantec System recovery 2013 installed When I go into granular recovery, hoping to restore some mailboxes, select the recovery point. Wait a minute or two an...
I'm Still Having trouble Adding Drivers to SSR 2013 SP2 SRD. The WinPE is 6.3.9600. This means Windows 8.1/Server 2012 correct? I have 2 new workstations, both HP, A Z230 which work fine for both the storage device and NIC. The Z440 with Intel I218...
I've made an image of a DELL PowerEdge T610 running win2K8R2 using SSR2013 SP2. I've restore this image on a DELL PowerEdge T620 using the restore anywhere option. RestoreAnywhere prompt me for new network adapter driver but not for the RAID Contro...
Why does Recover My Computer show Image Firmware Type as BIOS when the system uses UEFI? The recovery point set shows both (*:\) and (C:\) drives I am trying to recover the set to a USB connected driver. I do not see what I assume is the *:\ on the ...
I just completed a bare metal/boot environment restore using SSR2013. It was a 700GB image of a 750GB drive being restored to a 2TB drive. First, I used the boot disc as based on drive letter arrangement and windows using that drive for default loc...
Running trial of symantec system recovery 2013 desktop. Requirements - clone a hard drive to another (building multiple systems, same hardware) Installed on host, ran 'copy disk' selected MBR/startup etc etc, completed, disconnected old drive, chang...
I'm trying to do something that is dead simple, but frustratingly it's killing me... One little thing, just trying to backup and restore Windows Server 2012 R2 on an Intel i7 PC that's in UEFI mode with GPT partitions on a SATA SSD drive. Symantec ...
Hi I put (2) new drives into my computer. One for the C;/, one for D;/. The old drives were 512 native, the new drives are larger and 4k, in anticipation (and expectation) that R2 will work. The O.S. is on C;/. I moved things around, so I couldn't u...
First I will state that I did read the manual about this. And I am a longtime Ghost user and have done several cold metal restores with SSR2013 but this would be my first restore from within the windows SSr2013 GUI environment. So I want to use an ...
