Public Article on NetBackup Appliance Maintenance Releases
Please check out this living document. Welcome all feedback. https://www.veritas.com/support/en_US/article.100049781
Please check out this living document. Welcome all feedback. https://www.veritas.com/support/en_US/article.100049781
NetBackup Appliance 3.3.0.1 Maintenance Release 1 (MR1) is now available in the Download Center. https://www.veritas.com/content/support/en_US/downloads/update.UPD236988 Please install it *before* installing any other EEB/HotFix. If you install it af...
Please note the the following link: https://www.veritas.com/content/support/en_US/article.100038989 This is the *only* page that will provide Late Breaking News and Important Updates about NetBackup Appliances. Every effort will be made to keep this ...
A brief description of our plan 2 x 5220 appliance - one at each data center. Both replication to each other - DR for each other. Monthly write full backups to tapes for long term retention - 7 yrs in our case Max size that can be assigned to a Medi...
hi, we have a netbackup 5000 updated to latest firmware, and i have confiugred the appliance with one ip, now i need to change it, but no matter how hard i try i cannot change the node ip address, nor with web or with console. how can be done?! i ha...
Can anybody please suggest if we have a ost plugin for netbackup from Data Domain which supports the AIR feauture of Netbackup 7.1 .
I have 2 separate NetBackup 7.1 domains at different geographic locations, each domain has a Win2008 R2 64-bit master server (v7.1.0.1) and a Symantec NB5200 series appliance as a media server (v7.1.0.5). The NB5200's are set up as replication partn...
Question: Can the Netbackup appliance 5020 be shared across multiple Netbackup domains/
I am facing problem after configuring drives/libarary on Media Server. My robot control host is Master server but the drives show AVR control for my nebackup appliance/media server. I have tried giving the control to Media server it works fine and ...
Hi All, In my organization we are in phase of restructuring/Scaling the backup Infrastructure and License evaluation and doing some cost analysis in terms of Storage which we are using for the backup destination. --> Currently we a...
Can some one tell me the command to show the running services from the command line on the 5200 appliance? I am logged in as root and for the life of me can not remember how to show the list of services. Thank you.
Hi, I need to build a scenario having Primary & DR sites within a single domain. Primary Site has Master server, NBU5200, clients while DR has NBU5200 appliance and some clients which will only be used for restores at the time of disaster. Can NBU520...
Updated my 5200 appliance to version 1.2 and now all of the backups are erroring with a 213 (no storage unit avialable) I have rebooted the appliance and the master server. Verified that the host entry on the master resolved the appliance and shows ...
I have a new NBU5200,I try to upgrade it to 1.2,but failed: nbu5200.Software> Install SYMC_NB5200_update-1.2.0.0-SLES10.x86_64.rpm Preparing to install SYMC_NB5200_update-1.2.0.0-SLES10.x86_64.rpm. This software update requires a reboot of the ...
Hi, I notice a long overdue update has been released for the NetBackup 5200 appliance! I can't find any documentation on software compatibility. I can find hardware compatiblity, but not software. Is 1.2 compatibile, tested, and certified with NetBac...
I am working on creating a DR Site for our NBU 7.01 environment and have a few questions. My production environment has one Master server and two media servers. Daily backups are wrotten to to disk in the primary datacenter and relicated to the DR ...
the error like this: after finishing suse10 operation system restore, the client will automatically reboot, but it can't login into system,everytime it prompt we need input the following command: /sbin/chkconfigure -d BMR-FirstBoot after input comman...
I am currently in the process of configuring 4 NBU 5000 appliances - 2 x 2 Node Configurations. The first 2 appliances (1 x 2 Node Config) were done today, and following this I have some questions. The following is the chain of events I followed: 1...
Hi, I have a new 2500 just been delivered, I have no other netbackup software or devices. Do I need to install a master server and if so what software do I need to install and do I need to purchase it? I know it's a stupid question, but it's been ord...
Hi We are using solaris as master,media and clients. In one of the clients while installing the client i am getting a error like "tarball craetion failed" can any one help me to resolve this?
Trying to setup a 5200 with tapes drives that are fiber attached. The library and tape drives are zoned and the wizard sees 1 ADIC library and 3 LTO3 tape drives, which is correct. But when I go to configure the drives it shows a limitation on the ...
Does anyone know what this is actually doing? I had a drive go out yesterday and didnt recieve any messages other than the hardware emails that the appliance generates. I called support today to opened a ticket and a drive is being over nighted t...
A client of mine has bought the following; 72TB Symc Netbackup Platform Base 7.0 Xplat 1 Front End Tbyte Std Lic Rewards Band E 72TB Symc Netbackup Platform Deduplication option add-on 7.0 xplat 1 front end tbyte std lic ...