cancel
Showing results for 
Search instead for 
Did you mean: 
Storage Foundation
cancel
Showing results for 
Search instead for 
Did you mean: 

Discussion Posts

Resolved! VXVM gives trouble in solaris11.2

Hi,     I have installed VXVM6.0.1 SF with trial version on Solaris11.2 in VMWare workstation. While installing the installer asked to set lwp_default and stksize to 0x8000. I have done it and completed installation successfully without any issue. A...

vinothtv by Not applicable
  • 1067 Views
  • 1 replies
  • 1 kudos

Resolved! Replacing/Restoring Failed Drive

Yestarday, I had two drives in my storage san fail.  The san monitor reports that all the physical drives are fine. bash-2.03# vxdisk list | grep AMS AMS_WMS0_0   auto:cdsdisk    remote996006  remote9960   online AMS_WMS0_1   auto:cdsdisk    remot...

Neobane by Level 2
  • 2188 Views
  • 6 replies
  • 0 kudos

VVR - Data status inconsistent - DCM (autosync)

Hi! I’ve configured VVR  5.1_SP1RP4 (Veritas Storage Foundation) on a RHEL 5.9 server. I’ve started yesterday the replication and today (19 hours later) the state of Data Status still is Inconsistent. It’s only 1 RVG of 1000 GB. Looks like never ...

mcoulon by Level 2
  • 630 Views
  • 1 replies
  • 1 kudos

Resolved! How to use fsdb to repair VxFS file system?

The symantec offcial Manaul page of fsdb command is very simple with little information about its usage. Is there any guide to use fsdb command on all OS platform (i.e. AIX, HPUX ,Linux etc...) ? How to use fsdb to repair VxFS file system? My ult...

xhawk by Level 4
Partner Accredited Certified
  • 1338 Views
  • 2 replies
  • 0 kudos

Collection from VRTSexplorer

Dear All I have some enviornments of SFHA and VCS installed on Linux and Solaris servers. I have output of VRTSexplorer logs for every system. As the VRTSexplorer contains almost everything collected, I wanted to know if is it possible to get the fol...

Resolved! Patch missing for some components

My query. I was updating SFHA 5.0 MP3RP3 with the rolling patch of MP4RP1. The patch I downloaded did not contain any instalmp or installrp script. There were respective directories in which rpms were available. I had to to rpm -Uvh *.rpm to install ...

Resolved! Double disk failure, recovering rootdg

Through no fault of mine,  upon replacing rootmirror, rootdisk went belly up in a V880.  we booted off DVD, placed an OS on disk1, installed netbackup software, and restored through disk1 to disk0 which was on /mnt, /mnt/usr, and /mnt/var.  Restore w...

Rob74 by Level 4
  • 1157 Views
  • 6 replies
  • 0 kudos

About VxFS File system Disk layout

HI! Korea Symantec partner, I have been working on  Majortech Corp(http://www.majortech.co.kr). The SF6.0 about the new features and to Self-study, the following information is requested. -. Requests: VxFS file system disk layout-related architecture...

vxking by Level 2
Partner Accredited
  • 545 Views
  • 2 replies
  • 0 kudos

VCS Fire Drill - dmpnodename

Hi, I have a problem testing VCS Fire Drill setup on HP-UX 11i i v3 We have a global cluster environment, and trying to test a Bronze fire drill config. I created fire drill service group manualy. When I try to bring FD service group online, the foll...

ZKing by Not applicable
  • 232 Views
  • 0 replies
  • 0 kudos

Resolved! SF CFS for RAC without GCO option

Hi Everyone, I have a cluster setup where I have a 2 node primary SF CFS for RAC cluster (for RHEL) and a single node as DR for the same. I am suing VVR to replicate the volumes accross to DR. I do not have the GCO option license. My question is, wha...

shahfar by Level 5
Accredited Certified
  • 630 Views
  • 8 replies
  • 0 kudos

Resolved! vxmirror giving error

root@CLFPAP06 # vxprint -htg rootdg dg rootdg       default      default  113000   1224692943.6.GSMPAP07 dm rootdg01     c0t0d0s2     auto     81407    143267904 - dm rootdg02     c0t1d0s2     auto     81407    143267904 - v  rootvol      -         ...

sam321 by Level 4
  • 913 Views
  • 4 replies
  • 0 kudos

Resolved! VEA Server has failed to start

When trying start vxsvcctl (vea) I'm getting error "VEA Server has failed to start..." In log file /var/vx/isis/vxisis.log I have found error listed below: Log file /var/vx/isis/vxisis.log is being appended, not overwritten czw 09 wrz 2010 11:57:54 ...

umichal by Not applicable
  • 285 Views
  • 1 replies
  • 0 kudos

Resolved! cbr record of re-created disk group

We have a system which suffered multiple power failures in last 18 months. One of the oracle backup file system,which has it's own disk group, failed to mount in last a few power failures. Further check, the disk group record in the /etc/vx/cbr/* dir...

Resolved! Need Help on Migration

Hi, I'm trying to outline the steps to migrate an Oracle RAC (using ASM volumes) environment to SFRAC. Do you think the following steps are enough? Our setup will be similar to this:            ---RAC-1 --- SAN--|                    |-------------...

savasirez by Level 3
Employee
  • 290 Views
  • 4 replies
  • 0 kudos