cancel
Showing results for 
Search instead for 
Did you mean: 
NetBackup PureDisk
cancel
Showing results for 
Search instead for 
Did you mean: 

Discussion Posts

Resolved! Unable to change SMTP setting in Puredisk 6.6.5

According to p220 in the "Symantec NetBackup PureDisk™ Backup Operator Guide Release 6.6.4" and my own experiance (on other SPA's). The SMTP setting for event/policy escalations is set in the Gui at Settings>Configuration>Configuration File Templates...

M-NYC by Level 3
  • 2505 Views
  • 1 replies
  • 0 kudos

Set up puredisk network resiliency ?

Hello Does somebody know how to set up puredisk network resiliency ? Can see entries like Reconnecttimout in agent.cfg & spa.cfg, but have not been able to find any documentation on these parameters Regards Michael

VSShotfix

Hello All, As part of troubleshooting in pure disk environment for systems state failures. how to check that for windows 2003/2008 R1 or R2 clients have latest VSShotfix or how to check the server require latest vsshot fix. Please let me know

Anil_B by Level 4
  • 1454 Views
  • 1 replies
  • 1 kudos

System state failures in pure disk

Hello All, it was windows 2008 r1 Client backup is failing with system state(completing with 64%), and getting below errors. Error: 2: resource child process: snapshot required but there is nothing to snap: no such object Error: 2: name process: u...

Anil_B by Level 4
  • 2314 Views
  • 4 replies
  • 0 kudos

Resolved! Pure disk reinstallation

Hello Experts, while reinstaling the pure disk client s/w on existing host(agent id:23), what happens if we reinstall the pure disk s/w with different agent ID(agent id 42). How the PD SPA will consider?

Anil_B by Level 4
  • 2966 Views
  • 2 replies
  • 0 kudos

SLP Duplication Behaviour

Master Server ( nbu01 ) Windows 2008 NetBackup Master 7.5.0.7 Media Server ( nbu02 ) Window 2008 NetBackup Media 7.5.0.7 MSDP with puredisk  Setup storage server load balancing for dedupe pool  nbu01 and nbu02 setup SLP backup to disk then d...

Resolved! agent.cfg and pd.conf

Geeks !   I am very mucg confused about the functioning and usage of agent.cfg and pdf.conf file. Which one should i use to limit the bandwidth.   I gotta limit the bandwidth for duplication to 5MB/sec.   How should i proceed ?   Thanks, Pr...

PranavB by Level 4
  • 1902 Views
  • 2 replies
  • 1 kudos

Backup for File server

We have one Windows 2008 R2 - file server ( this is used for providing shared storage folder to users ). Required backup for this server. Purchased Netbackup version 7.6.0.1 and configured Widnows master server. Available 2 TB storage EMC - NAS.  T...

Tekkali by Level 4
  • 709 Views
  • 1 replies
  • 0 kudos

Resolved! Images Not expiring off Disk Netbackup 7.6

Hello I have noticed that one of our PureDiskVolume deduplication disks has filled up (above 95% water mark). I have expired some old images that are no longer required, I have done this but the space has not been cleaned up. I understand there is a...

NBU Puredisk

How to configure puredisk pls provide steps on windows servers

Netbackup Appliances 5230 with PureDisk: How many streams?

Hi all, We recently migrated to Netbackup Appliances running Netbackup 7.6.0.1 (Appliance version 2.6.0.1 ) We are running 2 appliances per site, each site is its own NBU domain (We use AIR to replicate). Each appliance is configured with a 70TB Pure...

Stop SLP with current image transfert

Dear All, When i try to cancel a SLP (nbstlutil.exe -cancel and cancel job in activity monitor) the current image transfert doesn't stop and is still transfered. The spoold.exe processus consumes some bandwith and puredisk destination is still growin...

PureDisk Agent Config File Update is stalled

Hi, I am troubleshooting SPAR replication issue on 6.6.3 PureDisk. On the Destination Storage Pool SPAR jobs start and keep being queued with 0% progress until 24h watchdog kills them. On the Source Storage Pool the SPAR job is killed by watchdog aft...

f25 by Level 4
  • 729 Views
  • 2 replies
  • 1 kudos

Possible to rename PureDisk storage server?

Hello, I apologize in advance if this has been asked, but my search did not come up with anything. My question is a simple one, but may not have a simple answer:   Is there a way to rename a PureDisk storage server?   Thanks! Jack

Common issues in Puredisk concept

Hi All,   Hope your are doing well..   We are going to use puredisk in our environment with NBU 7.1, kindly let us know common issues on puredisk with solutions.   Regards, Nnkvnb    

nnkvnb by Level 2
  • 814 Views
  • 2 replies
  • 1 kudos

Resolved! Error 83 after server reboot,

When I reboot my NBU 7.5.0.5 on Win2008R2 with MSDP, immediatly after the server is online, and a backup job is scheduled, I get error 83 on that job. If I retry the job a few minutes after the jobs runs just fine. I have seen this behaviour more tha...

kybeer by Level 5
  • 461 Views
  • 1 replies
  • 0 kudos

Scavenging frequency

Hi, We're running NetBackup Puredisk and every 12 hours there is a lot of activity on the database disk which uses almost 25% of the disk. Is there a way to change the frequency or is there some other method available to decrease the disk usage? /Per

Per_J by Level 2
  • 687 Views
  • 2 replies
  • 0 kudos

Resolved! MSDP - Timeout beim anlegen eines PureDisk Disk Pools

Hallo. Hoffentlich kann mir jemand von Euch helfen :) Über "Configure Disk Storage Server" wurde auf einem Media Server ein MSDP Storage Server eingerichtet. Danach wollte ich über "Configure Disk Pool" einen PureDisk Diskpool anlegen. Dabei habe d...

CLI Command For Dedup Rates

NBU Experts,   Do any of you know if there is a CLI command  that can tell the dedup rate for all the images created, and stored in a PureDisk pool? For examaple, if I run bpimagelist on the master server I get some good info, but not the dedup rate ...