It was a long journey but time has come...
Is there any special way neccessary to remove PureDisk server that was replicating to another one (both data and SPA) or just deactivate the relevant PureDisk agents under Agent management?
Kindly let me know the following few questions about pure disk.
1)what is pure disk?
2)About pure disk architecture?
3)About pure disk deduplication?
4)About pure disk web user interface?
5)Can i know the role of vssadminlist writers re...
We recently migrated to Netbackup Appliances running Netbackup 22.214.171.124 (Appliance version 126.96.36.199 )
We are running 2 appliances per site, each site is its own NBU domain (We use AIR to replicate). Each appliance is configured with a 70TB Pure...
The scheduled backups are not running for the past 4 days. The cron is running and alll other puredisk is also running.We are able to see the backups that took place before 4 days. i want to know the reason for this issue and the solution for this is...
I am troubleshooting SPAR replication issue on 6.6.3 PureDisk.
On the Destination Storage Pool SPAR jobs start and keep being queued with 0% progress until 24h watchdog kills them.
On the Source Storage Pool the SPAR job is killed by watchdog aft...
Do any of you know if there is a CLI command that can tell the dedup rate for all the images created, and stored in a PureDisk pool?
For examaple, if I run bpimagelist on the master server I get some good info, but not the dedup rate ...
Hi Forum, I've had a quick search through the DeDupe Admin Guide for v7.5 and I couldn't find any recommendations for volume manager or file system type for the MSDP database and/or data spaces. I guess an appliances uses VxVM and VxFS - but what el...
I am reclaiming deduplication storage space manually on a 5200 appliance. I am following the process in TECH180659.
I see a lot of these type of messages:
January 21 08:58:24 INFO : fakeFPCheck: DO 53c8979cafabfcc54c82cf7900fa465a is corr...
We have a PureDisk pool which fills up rather quickly. On inspection there is a Segments folder (\history\segments) on the PureDisk media server which has over 100GB of data.
I haven't been able to find much information on what the data is ...
I'm using Netbackup 7.5 and just move netbackup to new server and recovered full catalog. After that unable to restart postgresql 8.3 service , Deduplication services and backup is giving 2074 error "storage server is down "
Waiting for solution...
Setup : NBU 7.0.1 sending PDDO backups to PureDisk 188.8.131.52
Problem that we are facing on the PureDisk server is that the PDDO Data Removal policy runs, but it stays at 0% and does not clean any data.
I have a Storage Pool PureDisk 6.6.3a with 6 nodes :
- Node 1 / SPA, MBS, MBE and CR
- Node 2 / MBE and CR
- Node 3 / MBE and CR
- Node 4 / MBE and CR
- Node 5 / MBE and CR
- Node 6 / MBE and CR
This Storage Pool work ...
I have environment like this, and need best solution for this scenario.
Puredisk Server has external disk (i have already use 6 slot from 12 slot). Totally existing 2 TB diskpoll for PD server.
And now /Storage status is Full. We need increas...
Half my ( correctly sized ) /Storage partition in pddo 6.5 cr is taken up by /Storage/history/segments. The partition is out of space. /data and /databases have their own partitions . Does anyone know the function of /Storage/history/segments and wh...
I have a NetBackup domain that uses NBU appliances running Pure Disk. They consist of 4 appliances in one disk storage pool. The people before me configured this domain in quite a hurry, using 49 separate SLP's with multiple storage units confi...
We have had this frustrating issue for a month or more now one one of our SPA's and we have a active case logged but still no resolution.
When we try to a Full or Incr DR backup , it nearly always fails at 26% mark with the following error.
We are having major issues with duplication. I have 2 media servers and 1 management server, all was working fine until i changed one of the media server IPs. now i cant get a single duplication job to run (all backups and restores run fin...
We currently have a puredisk pool of 30TB which is running low in space.
I added a new lun to extend this pool.
The backup server has this configuration :
windows 2008 R2
disk pool is a dynamic spanned volume with 4 lun with a total of 30TB