cancel
Showing results for 
Search instead for 
Did you mean: 
NetBackup PureDisk
cancel
Showing results for 
Search instead for 
Did you mean: 

Discussion Posts

Resolved! Client - Media - PureDisk Linux network traffic

Hello everyone.   We have a backup solution and I am trying to find a bottleneck. Configuration is as follows: Veritas SFHA clustered Master server running NBU 7.5.0.6 on RHEL6.1.  Number of Media servers. And 3 pairs of PureDisk 6.5.5 pools as...

How to properly retire PureDisk servers

It was a long journey but time has come... Is there any special way neccessary to remove PureDisk server that was replicating to another one (both data and SPA) or just deactivate the relevant PureDisk agents under Agent management?

f25 by Level 4
  • 1822 Views
  • 1 replies
  • 0 kudos

VSShotfix

Hello All, As part of troubleshooting in pure disk environment for systems state failures. how to check that for windows 2003/2008 R1 or R2 clients have latest VSShotfix or how to check the server require latest vsshot fix. Please let me know

Anil_B by Level 4
  • 1508 Views
  • 1 replies
  • 1 kudos

Store the Contents on the Content Routers

Hello, Could you please help us to resolve below issue. Store the Contents on the Content Routers : tx: could not be stored (Error while processing \\?\D:\Groups\CRED_PORTFOLIO_IS_09919\CCM\cpis\SOx Production\2014 Projects\CPIS Presentation\SOx P...

Spool and Spad are not starting -2106

Hello,   I'm seeing one of my disk down going under the follow error in the OS (linux):  ./spad --trace Error: 25002: BadValue : (none) File     : /etc/pdregistry.cfg Section  : Symantec/PureDisk/ContentRouter Entry    : ConfigFilePath Reaso...

Luiz_Prina by Level 4
Employee
  • 1422 Views
  • 0 replies
  • 0 kudos

Resolved! How to restore MSDP master/media server after disaster

Hello, This is my first post.    We have two NetBackup 7.0.1 servers. Both W2008R2 ent. Both VMs. We use MSDP feature. Both servers have 10Tb drives to hold images.   Catalog backup jobs are configured. Key file is copied over the network to an...

Netbackup Appliances 5230 with PureDisk: How many streams?

Hi all, We recently migrated to Netbackup Appliances running Netbackup 7.6.0.1 (Appliance version 2.6.0.1 ) We are running 2 appliances per site, each site is its own NBU domain (We use AIR to replicate). Each appliance is configured with a 70TB Pure...

Netbackup exchange 2010 backups failing with error 130

Hi All, From past few days we have been observing error 130 with exchange 2010(DAG)backups, I have checked in various symantec docs and found out issue could either be with circular logging or exchange writers but none of them are issues presently. A...

PureDisk Agent Config File Update is stalled

Hi, I am troubleshooting SPAR replication issue on 6.6.3 PureDisk. On the Destination Storage Pool SPAR jobs start and keep being queued with 0% progress until 24h watchdog kills them. On the Source Storage Pool the SPAR job is killed by watchdog aft...

f25 by Level 4
  • 788 Views
  • 2 replies
  • 1 kudos

How to determine if CR rebasing completed

Hi, I am trying to find a way to find out if the post 6.6.3a PureDisk upgrade Content Router rebasing has completed. It is quite easy to check with the crcontrol if the rebasing option is enabled or disabled at all but I would like to know if the reb...

f25 by Level 4
  • 1249 Views
  • 4 replies
  • 1 kudos

Common issues in Puredisk concept

Hi All,   Hope your are doing well..   We are going to use puredisk in our environment with NBU 7.1, kindly let us know common issues on puredisk with solutions.   Regards, Nnkvnb    

nnkvnb by Level 2
  • 873 Views
  • 2 replies
  • 1 kudos

Resolved! Error 83 after server reboot,

When I reboot my NBU 7.5.0.5 on Win2008R2 with MSDP, immediatly after the server is online, and a backup job is scheduled, I get error 83 on that job. If I retry the job a few minutes after the jobs runs just fine. I have seen this behaviour more tha...

kybeer by Level 5
  • 512 Views
  • 1 replies
  • 0 kudos

Scavenging frequency

Hi, We're running NetBackup Puredisk and every 12 hours there is a lot of activity on the database disk which uses almost 25% of the disk. Is there a way to change the frequency or is there some other method available to decrease the disk usage? /Per

Per_J by Level 2
  • 732 Views
  • 2 replies
  • 0 kudos

Resolved! MSDP - Timeout beim anlegen eines PureDisk Disk Pools

Hallo. Hoffentlich kann mir jemand von Euch helfen :) Über "Configure Disk Storage Server" wurde auf einem Media Server ein MSDP Storage Server eingerichtet. Danach wollte ich über "Configure Disk Pool" einen PureDisk Diskpool anlegen. Dabei habe d...

CLI Command For Dedup Rates

NBU Experts,   Do any of you know if there is a CLI command  that can tell the dedup rate for all the images created, and stored in a PureDisk pool? For examaple, if I run bpimagelist on the master server I get some good info, but not the dedup rate ...

PureDisk 6.6.5 is now available!

Greetings all, The FINAL release update for NetBackup PureDisk, version 6.6.5, is now available! Release Update NB_PDE_6.6.5-53481.tar provides cumulative fixes to Symantec NetBackup (tm) PureDisk 6.6.  http://symantec.com/docs/TECH205534 Documentat...

CRZ by Level 6
Employee Accredited Certified
  • 402 Views
  • 0 replies
  • 3 kudos