While installing the NBU client binaries on Redhat Linux machine getting library file issue.
error while loading shared libraries: libacl.so.1: cannot open shared object file: No such file or directory
tar failed unpacking /tmp/bp.2...
Need one hep from all experts here.
one of tape drive from HP ESL library is connected to Solaris server and it is detecting as Disk device not as tape device.
actaully it should be tape devices as it is physical tape drive.
My backup jobs that backup to robot has ended with exiting [status=96 unable to allocate new media for backup, storage unit has none available]
I think it may be cause by tape's labels because it didn't have a problem before I change my label w...
How can I configure mail alert for exchange server backups status with following details
Exchange server name along with the storage group detail as I need to confirm each storage group backup started as per schedule.
My Master server was Linux and N...
Attached is a diagram of the backup environment. The back up of all the clients are performed in the local site, they're stored in the DataDomain (VTL). The historical backups are duplicated to tape and send them out. For the critical data, it...
From symantec netbackup 7.0.1 NBU console we are able to eject the tapes but they are not reaching the CAP from where we can replace the tapes. please suggest there is any other console like from where we can do it?
Provide alrternate steps to ejec...
how to improve backup and restore performance(For example I am running a backup or restore operation it is taking 10 hours (consider ) then I need it to finish it within 5 hours or below mean as early as possible is it possible or not if possible m...
Master Server = RHEL 6 (VM)
Media Server = RHEL 6
VTL = data Domain DD880 w/ code 22.214.171.124
NetBackup sees the robot and the drives. We just cannot get any tapes to show up doing an inventory. Here is where I'm at so far:
I want to have an end solution where client backups are stored on disk for a period and also copied over to tape. At the moment the solution I have is working but performance is poor.
In my current solution I have a Tape Library unit directly connect...
I have any enviroment with both Physical and Virtual (VMware) servers
I want to backup to both disk and tape.
I have no fiber in the enviroment so I don't see FT w/SAN client being an option
So I think that leaves me with a SAN media server. But sin...
i want to backup Active Directory and Exchange using GRT but i am facing a problem with GRT technology, GRT needs physical disk
i have a virtual taope which means disks but seen by netbackup as a virtual tape , how can i make the GRT works with this ...
I have old catalogs tapes which we are not using, can we use the same tapes for regular data under scratch Pool .
What I did was.
1. The catalog tape moved to scratch pool from netbackup console by using change menu ( GUI - New Pool )
1. We have netbackup mater 7.0 installed on a Windows 2008 x86-64 SP1 virtual machine
2. There are two virtual HBA cards (Hardware used for virtualization is CISCO UCS B200 blades)
3. We have a physical TL (TS3200) and a VT...
I am not sure if this is possible but it would be nice. Anybody attempted this?
NBU -> HP VLS9000 (local) -> deduplicated and replicated to another (LBR) ---> VLS (remote)
Both the local and remote VLSs are managed by the same master and each...