Topics with Label: VMware

Subscribe to NBU notifications

In case you are not aware - you can subscribe to NBU notifications over here: https://sort.veritas.com/spec_doc Hopefully NBU 9 will be added to the list soon.

VMWare Restore with NBU 7.01 + VMWare Hotfix 14

We have a fairly establihed setup with VC / VSphere 4.1 Update 1 alongside NBU 7.01 with VMWare Hotfix v14 This is working fine on 6 Media Servers targeting multiple Virtual Centre`s and even off site DR Restores with some pretty good experience of...

Resolved! Netbackup for VMware, how to configure datastores where the backup host is a VM

I've been working through the Netbackup Admin Guide for VMware and some on-line reading, but I'm still not clear on one point. Where it says : "Hot-add Transport You can think of hot-add transport as a special case of SAN transport where the ba...

Resolved! NetBackup for VMware Question

Currently running NBU 7102 and have 1 media server (MS2008) configured for VMware backups. Which has been setup for months but just realized that in disk management I see all the DataStore Disk that were presented to the server. Is this normal behavi...

Resolved! Restore NBU 7.1 Catalog Backup to Virtual Master Server

Here is my current environment: 2 Master Servers (VCS Clustered) running W2K3 Standard SP2 w/ NBU 7.1.01 3 Media Servers running W2K8 R2 w/ NBU 7.1.01 My Goals are 2 fold: Recover a catalog backup to a virtual environment to test the recovery of...

Exchang 2010 with NetBackup 7.1 the backup partially successful

hello I face a problem wich backup partially successful , thats mean the back up not success I find that the logs drive completly full (100 GB ) and the mailboxDB normal only (35 GB used) the server stopper reciving Email , so I move some of the logs...

Resolved! Migrate Master Server from Netbackup 7.0 32-bit to NB 7.1 64-bit

Hi there, I am in the middle of migrating from NB 7.0 32bit to NB 7.1 64bit. While i know that there should not be a problem on the OS level, Do you have any documentation, steps on how to backup and restore from NB 7.0 32bit to NB7 7.1 64 bit?? Can ...

Resolved! Netbackup, VMware restore - Unable to select datastore

Environment setup to evalutate Netbackup Server 1: Windows Server 2008R2 Netbackup version 7.1 Domain-member Server 2: VMware version 4.1.0 (standalone) Not part of domain My backup is running fine, but when I try to restore it says insuffic...

VMware Full Mapped VM backup effect on Catalog size

My current environment is netbackup 6.5.6 using VCB to backup VMs. Soon we are migrating to 7.1, hopfully with netbackup appliances and deduplication In the new setup, I would like file level restores for all VMs, so will be using Full Mapped option....

VMware restore requires working DNS?

Environment: Netbackup Enterprise Server 7.0.0+a VMware related hotfix, W2k8 64 Standard ESX version 4.1 running stand-alone (no Vsphere) During a recent DR exercise we found that we were getting the error listed in: http://www.sy...

NetBackup - error 13 and error 96

Hello, I'm a beginner with Nebackup and i'm in charge of an existing infrastructure. My backup server is on Windows Server 2008 with NetBackup 7.0.1.0 (i'm using SAN and an emulated HP Ultrium 4 Tape). This backup is used to save a lot of VM running ...

Resolved! Netbackup - erreur 13 et erreur 96

Bonjour, Je débute avec Netbackup et je suis chargé de reprendre l'infrastructure d'une collègue partie en vacance. Notre serveur de sauvegarde est sous Windows 2008 avec Netbackup 7.0.1.0 et est chargé de sauvegarder des machines virtualisée sous Vm...

Resolved! Trouble with BLIB of Netbackup 7.1.0.1 and incremental backup

Hi, recently I've upgraded my backup infrastructure to the 7.1.0.1 of Netbackup (coming from 7.1 version) Everything was ok except for an incremental backup of a huge vm (this vm was the only one that we used to backup in this way) where is installed...

How to go for Netbackup 6.0 MP7 on windows 2003 32 bit to NB 7.x on windows 2008 64 bit

Hello I am planning to upgrade my NB infrastructure. Currently NB 6.0 MP7 is installed on HP blade hardware with Windows 2003 OS and planning to install NB 7.x on new IBM hardware with Windows 2008 R2. How can I go for it? I can create parallel envir...

backing up blank space?

Hi Folks a while back i had an issue with vss snaps and getting them to vtl, that issue is solved thankfully!!!!!!! my problem now is this: I vss snapshot 3 495gig drives to an alternate host which then writes the backups to a vtl unit. There is noth...

Resolved! Licensing for VMWare

Good day I'm running Windows 2003 SP2 R2 32bit Master /Media Server, Netbackup 6.5.4. I have 12 ESX Hosts, however I'm taking normal client backups (installing Netbackup Client agent on each VM) and not taking snapshots. I just want to know what kind...

Resolved! vss snapshots:identicle servers in same policy, one failing!!

Folks If anyone could review the below i would very much appreciate it, i have 2 windows 2008 R2 ver6.1 build 7600 servers and i am trying to back them up by vss snaps. In the policy i have the 2 servers 1:virttst244s and 2:virtfop012s. Virttst244s...

Consolidated backup

Dear All, Regarding the consolidated backup, has anyone already implement this yet ? When I look at the documentation, it appears that Consolidated backup does not work with non-windows guest OS for file-level backups. I will need to see if this ...

VMware backups error

I have the following problem, when I try to browse the virtual machines to configure the policy and I got the message: “VIX connect failed and VCB not installed”. My environment is configured as follows: Master/media server (backup host) - Ne...

Resolved! How to create all snapshot before Full/Diff backup is started.

Hi. I use NetBackup 7.0.1 for VMWare and Windows 2003 servers running on VMs. My problem is below: I want to backup VMs, and create all snapshots in advance. When I set Maximum concurrent jobs is 5 in Storage Unit configuration, 5 jobs start and ...

NetBackup 7.1 VMWare VMDK Restore

I performed a test yesterday and was a little surprised on one aspect of it. I created a Server 2008 VMWare client as my test subject. Created a SnapShot backup policy for the VMWare client in NetBackup and did my initial full backup of the VMDK. I t...

VOX

Discussion Posts